Welding on frame, what components to remove/unhook?

Got questions? We got answers....
Post Reply
Rob M
Member
Posts: 6
Joined: 07:13 pm Aug 29 2006
Country:

Welding on frame, what components to remove/unhook?

Post by Rob M »

I will be doing some welding on the tail section of the frame. Concerned with the electronics. Using a cheap buzz box.

What should I do to make the frame safe for voltage? I have maybe 90 seconds of 'arc' time.

I'm going to connect the "legs" of the frame behind the seat and add supports for my fender/rack I just finished. I'll get pics if anyone wants to see. Hint: Diamond plate....

Going to be carrying 30+ lbs of fuel/gear for hundreds of miles this summer. Stock tank + 2 gallons gives me 150 miles before reserve. :cool:
Little Jeff
Member
Posts: 136
Joined: 08:40 pm Feb 14 2008
Country:
Location: Tacoma, WA

Post by Little Jeff »

I would disconnect the entire ignition system, but that is just me.
Little Jeff
Riding with your buddies and an adventure, riding with certain individuals is an ordeal.
Post Reply