KDXRIDER.NET

I had the RAD valve on my bike and I just went back to the stock valve. The original owner included everything but the clamp. I was just going to use a radiator clamp but the ones for that size are 1/2" wide and that clamp needs to be 3/8". I ended up taking two small #6 clamps and putting them end to end to make a larger clamp (they are 3/8" wide) but I was wondering where you could get 3/8" large diameter clamps besides from Kawasaki?

Possibly at an Auto Parts Store?

I tried Advance and all they had was the 1/2" wide in the larger clamp size. I think an SAE 24 or 26 clamp will work, but they are all 1/2" band width.

$3.57 at Ron Ayers plus shipping