intake/carb clamp

Got questions? We got answers....
Post Reply
lemmy
Member
Posts: 221
Joined: 12:36 pm Jul 25 2008
Country:

intake/carb clamp

Post by lemmy »

I had the RAD valve on my bike and I just went back to the stock valve. The original owner included everything but the clamp. I was just going to use a radiator clamp but the ones for that size are 1/2" wide and that clamp needs to be 3/8". I ended up taking two small #6 clamps and putting them end to end to make a larger clamp (they are 3/8" wide) but I was wondering where you could get 3/8" large diameter clamps besides from Kawasaki?
KarlP
Supporting Member III
Supporting Member III
Posts: 1484
Joined: 02:26 pm Jun 29 2005
Country:
Location: Alabama

Post by KarlP »

Possibly at an Auto Parts Store?
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
lemmy
Member
Posts: 221
Joined: 12:36 pm Jul 25 2008
Country:

Post by lemmy »

I tried Advance and all they had was the 1/2" wide in the larger clamp size. I think an SAE 24 or 26 clamp will work, but they are all 1/2" band width.
User avatar
Mr. Wibbens
KDXRider.net
KDXRider.net
Posts: 4884
Joined: 02:57 am Nov 07 2004
Country:
Location: Playing in the Poison Oak
Contact:

Post by Mr. Wibbens »

$3.57 at Ron Ayers plus shipping
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
Post Reply