damper monting for USD's
Posted: 04:16 pm Nov 02 2008
Just wondering if I should be looking far the KDX montin hardware or the KX one. I have a applied racing top clamp and matching 97 KX forks.
KDXRIDER.NET
Discussion group for KDX enthusiasts
https://kdxrider.net/forums/
damper monting for USD's
Page 1 of 1
Posted: 08:18 pm Nov 02 2008
which damper?
Posted: 09:58 pm Nov 02 2008
I would say call the stabilizer company and tell them what you have and they can probably tell you what parts you will need to make it all work.
Posted: 10:40 pm Nov 03 2008
A scottsMr. Wibbens wrote:which damper?
Posted: 01:25 pm Nov 04 2008
Have KDX with Scotts mount. Using KXF 250 forks with BRP triple clamp that allows the submount of stabilizer. Used the pin and collar that Scotts can supply but had to modify and reweld it.
KDX tanks is beefy compared to KX tank so needed to make some clearance. Other than some grinding and welding its pretty straight forward.
Steve
KDX tanks is beefy compared to KX tank so needed to make some clearance. Other than some grinding and welding its pretty straight forward.
Steve
Posted: 04:03 pm Nov 04 2008
If you have a KX top clamp... you will need the KX setup.