KDXRIDER.NET

On the output shaft of the tranny there is a collar with 2 orings.

http://216.37.204.203/Kawasaki_OEM/Kawa ... A=170&B=42

part numbers 92055 and 92143. Do the 2 orings butt up against gear on the tranny shaft? with the lip on collar going over the orings?

Thanks,

Sean

The two o-rings rings go on first followed by the collar (lip facing away from the sprocket).

left side cover -> o-ring -> o-ring -> collar -> sprocket -> clip

Check out the thread

http://www.kdxrider.net/forums/viewtopi ... highlight=