Bearings

Got questions? We got answers....
Post Reply
ThePearl
Member
Posts: 42
Joined: 06:48 pm Sep 07 2008
Country:

Bearings

Post by ThePearl »

I am new to the KDX world.

Can anyone provide me with a list of bearing sizes?

Front and rear wheel bearings.

Swingarm bearings.

I always like to have spares of these at home so I'm not stuck waiting for the dealer to order them.

Thanks,
Shayne
2002 KDX 200
User avatar
Rick
Platinum Member
Platinum Member
Posts: 914
Joined: 09:24 pm Nov 10 2006
Country:
Location: Independence,KY

Post by Rick »

Find em here......http://www.bikebandit.com/
Yes, they really do let me drive the Train!
1991 KDX 250 $Sold but not forgotten....
1996 Suzuki DR 350 $Sold!
2002 Honda CR 250 worth more than my house at this point........ :-)
2004 DR 650se Road Warrior
2002 DL1000 V-STROM
User avatar
canyncarvr
Gold Member
Gold Member
Posts: 6943
Joined: 01:07 pm Nov 05 2004
Country: US
Location: The Mythical State of Jefferson

Post by canyncarvr »

..by going to the OEM parts section, choosing make/model/year/component diagram. The below paste is for a bearing in the KDX swingarm/rear suspension:

92046A: BEARING-NEEDLE,22BM28


It's a 22mm inside diameter bearing that is 28mm long.

BikeBandit's diagrams aren't as easy to read as some others (all the same diagrams I think, just 'viewed' differently. You can find the same on RonAyers site and BuyKawasaki.com (user/owner info).


OkeyDokey?


If you're ordering OEM bearings, the size is beside the point, as you just order the applicable PN. But..you ask the size, so I'm thinking you are buying them from a bearing place? In which case, be aware of whether you are ordering caged, retained or which-side-sealed bearings.

Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis

bike profile: !clicky!
Post Reply