Clutch Lever pivot bolt

Got questions? We got answers....
Post Reply
User avatar
cyclenutz
Member
Posts: 35
Joined: 11:06 pm Jan 18 2008
Country:

Clutch Lever pivot bolt

Post by cyclenutz »

I broke the stock clutch lever pivot bolt while overtightening it.. Id like to replace the factory bolt with the tapped head and stud on the bottom (for factory handguards) with a plain pivot bolt. WHERE can I find one ?
september9
Member
Posts: 60
Joined: 02:20 pm Dec 04 2007
Country:
Location: North Idaho

Post by september9 »

You can probably find something that will work at a hardware store or your local bike shop.
1998 KDX 200
- 2000 KX 125 front end.
- Bills Pipe
- RB Head and Carb !!!
1987 Husqvarna 430XC
- Up-Tite Pipe
User avatar
cyclenutz
Member
Posts: 35
Joined: 11:06 pm Jan 18 2008
Country:

Thanks

Post by cyclenutz »

Ended up ordering a couple KX250 pivot bolts from the dealer. Im a firm believer in using the right hardware especialy if its acting as a bearing surface
Post Reply