KDX kick return spring Help

Got questions? We got answers....
Post Reply
WOLFYMAN
Member
Posts: 66
Joined: 09:46 am Oct 15 2007
Country:
Location: KANSAS

KDX kick return spring Help

Post by WOLFYMAN »

Putting a new one on is there some trick to this. I get the top in the hole but when i try to turn the spring for the bottom hole it wants to pull the top out. Then once iI release the bottom it wants to back out of the hole. I was wondering when I put the side cover back on if it will hold it in place.
WOLFY
AwfulSmokey
Member
Posts: 95
Joined: 07:11 pm Oct 16 2007
Country:
Location: Ft Myers, FL

Post by AwfulSmokey »

I doubt it. The spring should stay in place. Do you have the plastic collar inside the spring? I just did my KX250 and i'm not sure if it's the same as the KDX. I know it was a pita until i looked at the picture and seen exactly how it went on.
1989 KDX 200
1999 KX 250
Post Reply