Does this taillight work/fit the stock KDX fender? My brake/tail light works, but now wishing to add this legal looking tailight w/ license plate.
http://www.motorcycle-superstore.com/2/ ... light.aspx
Now Adding Legal Tailight on KDX
- blimpman
- Supporting Member II
- Posts: 221
- Joined: 07:05 pm Oct 23 2007
- Country:
- Location: Central Florida
- Indawoods
- Creator and Founder
- Posts: 9951
- Joined: 09:59 am Jun 12 2003
- Country:
- Location: Midwest
Works fine with the stock setup.
*** Administrator //***
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
- blimpman
- Supporting Member II
- Posts: 221
- Joined: 07:05 pm Oct 23 2007
- Country:
- Location: Central Florida
Stock tail-light wires are what i used. The BD tail-light didn't fit real well on the stock fender so i installed the MX fender. Looks pretty good. The brake light switch that is used instead of the banjo bolt on the master cylinder was a bit of a pain to install because of bracket clearance.Indawoods wrote:Works fine with the stock setup.
Brian
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230
- blimpman
- Supporting Member II
- Posts: 221
- Joined: 07:05 pm Oct 23 2007
- Country:
- Location: Central Florida
Here is my bike... Now street legal ( barely) and ready to ride some enduros. I have some surgery to get over and then I'll be ready...
13/47
2 " lowering links
ROX risers
Woods Pipe - FMF silencer
Amsoil Interceptor 32-1 w/CAM2 110 Octane
Type F / 10w-40 (2:1) Gear Oil
S-12 front and back - In the garage ready to go.
13/47
2 " lowering links
ROX risers
Woods Pipe - FMF silencer
Amsoil Interceptor 32-1 w/CAM2 110 Octane
Type F / 10w-40 (2:1) Gear Oil
S-12 front and back - In the garage ready to go.
Brian
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230
The destination is just a by-product of the journey
1990 KDX 200-E1 - Donated to my riding buddy Bill!
2003 YZ125
2008 WR250R
2005 TT-R230