Lean/Rich causing excess smoke?
- fuzzy
- KDXRider.net
- Posts: 3437
- Joined: 01:29 pm Jun 18 2003
- Country:
- Location: Fredneck, MD
-
- Member
- Posts: 36
- Joined: 12:13 am Nov 22 2006
- Country:
- Location: Texas
Sorry Inda and GS, my dumba@$ mistake. I have been mixing 1 pint to 4 gallons = 32:1, not 16:1. I knew it was 1 pint to 4 gallons, but slipped on the actual numeric ratio. I should be okay there. I might try 40:1 and see how that pans out.
I will go with Amsoil or a full synthetic too. Thanks!
If I do modify the jetting to reduce the fuel in the fuel/oxygen mixture, thus hopefully reducing the amount of fuel/oil mix that is not getting burned, is this pretty easy to do?
I will go with Amsoil or a full synthetic too. Thanks!
If I do modify the jetting to reduce the fuel in the fuel/oxygen mixture, thus hopefully reducing the amount of fuel/oil mix that is not getting burned, is this pretty easy to do?