bearings

Got questions? We got answers....
Post Reply
User avatar
jrock
Member
Posts: 16
Joined: 11:40 am Sep 20 2007
Country:

bearings

Post by jrock »

so today i was riding home and my back tire started woblin back n forth so i took the back wheel off and the bearings fell out on to the floor all thats left in there is the outer ring and i cannot get them out any ideas?
User avatar
scheckaet
KDXRider.net
KDXRider.net
Posts: 3740
Joined: 12:09 am Nov 10 2005
Country:
Location: edmond oklahoma

Post by scheckaet »

Have you tried a long screwdriver and a hammer from the other side of the wheel?
KDXSean
Gold Member
Gold Member
Posts: 107
Joined: 09:26 pm Nov 22 2004
Country: Canada
Location: Ottawa

Post by KDXSean »

Try spraying with penetrating oil and let it sit overnight, heat the hub and tap out with a punch or something similar going round and round
User avatar
jrock
Member
Posts: 16
Joined: 11:40 am Sep 20 2007
Country:

Post by jrock »

yeah i tried a screw driver than i tried a 4 foot pole haha they didn't move at all...i don't think they ever greased um , probly the same ones that came in the bike 17 yrs ago
User avatar
m0rie
Supporting Member I
Supporting Member I
Posts: 2220
Joined: 10:25 pm Nov 29 2004
Country:
Location: Crescent City, CA

Post by m0rie »

You did remove the circlip right?
1989 KDX 200
2007 TTR-50E
User avatar
RBD
Gold Member
Gold Member
Posts: 210
Joined: 02:00 am Jan 18 2005
Country:
Location: Portland, Oregon USA
Contact:

Post by RBD »

If you can get someone to run a arc weld, wire feed, or heli-/arc bead around the inside of the outer race it will shrink it and it will fall out.

Ron
User avatar
jrock
Member
Posts: 16
Joined: 11:40 am Sep 20 2007
Country:

Post by jrock »

yeah i removed the circlip
User avatar
kdxquebec
Supporting Member II
Supporting Member II
Posts: 1255
Joined: 07:18 am Nov 24 2004
Country:
Location: Québec:North Pole
Contact:

Post by kdxquebec »

Can you cut the bearing race with a dremel tool?
'89 KDX 198cc '03 Gasgas Ec250 '13 Husaberg Te300
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
Image
User avatar
jrock
Member
Posts: 16
Joined: 11:40 am Sep 20 2007
Country:

Post by jrock »

i would try if i had 1 the one but the 1 i had was crap so i threw it away
KarlP
Supporting Member III
Supporting Member III
Posts: 1484
Joined: 02:26 pm Jun 29 2005
Country:
Location: Alabama

Post by KarlP »

They'll come out.
A long punch and a hammer, warm it up with a torch. bang bang bang

Screwdrivers aren't punches. No sense beating the handle up on one
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
User avatar
jrock
Member
Posts: 16
Joined: 11:40 am Sep 20 2007
Country:

Post by jrock »

haha i gotta make do cant be running to my grandpas body shop all the time, thanks for the replys
Post Reply