Front caliper interchangablity For FACTORY usd forks

Got questions? We got answers....
Post Reply
vinny
Member
Posts: 100
Joined: 10:33 am Nov 12 2006
Country:
Location: MS

Front caliper interchangablity For FACTORY usd forks

Post by vinny »

All I lack is my breaks. My front has siezed bolts. I found one on ebay off a 91' KX125. Bike Bandit shows the part number to be 43041A. The part number for my 93' KDX200 is 43041. No A. Would there be any differance? I have noticed that 92' and earlier look completely diffrent but the 93', 94' (maybe even later) look for the most part just like some of the same era KX's (see 91' KX125). Is there anyway to cross referance these parts?

The front is NOT fixable for those who may ask.

Thanks
Vinny
vinny
Member
Posts: 100
Joined: 10:33 am Nov 12 2006
Country:
Location: MS

Post by vinny »

Yes. The front and rear calipers are the same on a '91 KX125 and '91 KX250 as a '93-'94 KDX200. I now have front breaks! Now I have to figure out what the deal is with the rear. It won't build pressure.

Vinny
Post Reply