Page 1 of 2
Fastway F5 Foot Pegs
Posted: 10:25 am Jul 20 2007
by Green Hornet
They will be delivered today. Will let ya know how they work.
I ordered the 97-05 KX125/250 pair, since they did not have a KDX listed......
Posted: 10:29 am Jul 20 2007
by 2001kdx
Are these the lower pegs?
Posted: 11:28 am Jul 20 2007
by Green Hornet
2001kdx wrote:Are these the lower pegs?
Yes, the ones that go back & lower. You can also tilt them inwards to help keep your knees in & they have replaceable pins
Posted: 11:49 am Jul 20 2007
by canyncarvr
What are you going to do for springs.....?? Use theirs or yours? Try to anyway.
The KX/KDX springs are not at all the same.
Let alone pin size. I don't know they are or are not the same. Doubt they are.
I would like to see your install pics..and know how they fit!
Keep us posted!
Posted: 01:02 pm Jul 20 2007
by fuzzy
Cool!
Posted: 01:10 pm Jul 20 2007
by Green Hornet
They come with different size universal collars. It does come with springs & I'll figure what I have to do.
Actually you use your STOCK FRAME PINS
Posted: 05:56 pm Jul 20 2007
by krazyinski
had to grind a bit to make mine fit and use my old springs, but then these were for a 2002 KTM 300 exc. The CR high mini bars and the pegs , makes for a nice feel.
Posted: 03:04 pm Jul 21 2007
by Green Hornet
I have them grinded & test fitted. Did you drill through the peg side to use the stock spring or lay it on top??? I am thinking of drilling a hole, since the lay on top put more stress on the cotterpin that holds the pegs in.....
Also the pegs have a slight forward pitch now.
Posted: 06:57 am Jul 23 2007
by krazyinski
drilled a hole in mine
Posted: 06:29 pm Jul 23 2007
by Green Hornet
Got them installed...Was able to lay the spring over the top of the pegs...Tried drilling a hole, those pegs are like granite
Posted: 09:14 pm Jul 23 2007
by 2001kdx
well? Did it give ya some room?
Posted: 10:18 am Jul 24 2007
by Green Hornet
Moved my foot about an 1 inch back, have a slight forward pitch & have a slight tilt upwards w/o the collars that came with the kit. You gain peg surface towards the back
Here's some pics
Posted: 12:54 pm Jul 28 2007
by Green Hornet
Posted: 06:47 pm Jul 29 2007
by 2001kdx
They look great! Can't say the same for you though
Posted: 10:39 pm Jul 29 2007
by 89kdx200rdr
just dont do what i did and put them on the day before a race and not ride on them. they are nice but i needed to lower my brake pedal and raise my shifter before they felt right
Posted: 11:08 pm Jul 29 2007
by canyncarvr
Ride report?
Posted: 11:23 pm Jul 29 2007
by Rick
Man, that thing looks like a bicycle peddle! Cool!
Posted: 08:28 am Jul 30 2007
by Green Hornet
No ride report yet, but brake & Gear Lever height seem fine. Yeah they are WIDE Rick
Posted: 11:37 am Jul 30 2007
by 2001kdx
For some reason they don't look ag grippy as I imagined. Guess we'll have to wait for a ride report.
Posted: 03:11 pm Jul 30 2007
by Green Hornet
They are "grippy"