Stock chain wear blocks ?
- Oldschool
- Supporting Member III
- Posts: 195
- Joined: 05:02 pm Nov 07 2006
- Country:
Stock chain wear blocks ?
Hi Guys,
Where can I get stock kdx replacement chain wear blocks?
from what I'm seeing only Kawasaki carries them.
They come in two halves and I want to put a spacer / Shim between the two for O'ring clearence.
'03 KDX200
(Oh and I need them buy Saturday)
Thanks
Tony
Where can I get stock kdx replacement chain wear blocks?
from what I'm seeing only Kawasaki carries them.
They come in two halves and I want to put a spacer / Shim between the two for O'ring clearence.
'03 KDX200
(Oh and I need them buy Saturday)
Thanks
Tony
-
- Supporting Member II
- Posts: 1455
- Joined: 06:54 pm Aug 08 2005
- Country:
- Location: Orange County-New York
- Contact:
FRP
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
FWIW..I got a 'wider' chain guide. It's not from FRP (I didn't like the color OK?). I figured the 'wider' part of it would keep the master link clip from wearing literally out.
It didn't have that effect. The clip STILL wears to paper-thinness...sometimes to the point of falling off. That (the falling off part) has happened to me a couple of times.
A further BTW...I've cut my own blocks out of summa that teflon block stuff? Wibby knows the term (PTFE?)..high density something or other. I'll get it if you're interested. Anyway, trace the pattern of the old one onto the stock material..cut it out with a scroll saw, drill a couple of screw mounting holes, done!
Available probably as scrap from any industrial outfit. I got mine from a sanitation company (used as slide blocks for their garbage haulers). The stuff is commonly used as chain guide material in milling/processing plants.
Lot cheaper than buying one from anywhere...'cuz it's FREE!
It didn't have that effect. The clip STILL wears to paper-thinness...sometimes to the point of falling off. That (the falling off part) has happened to me a couple of times.
A further BTW...I've cut my own blocks out of summa that teflon block stuff? Wibby knows the term (PTFE?)..high density something or other. I'll get it if you're interested. Anyway, trace the pattern of the old one onto the stock material..cut it out with a scroll saw, drill a couple of screw mounting holes, done!
Available probably as scrap from any industrial outfit. I got mine from a sanitation company (used as slide blocks for their garbage haulers). The stuff is commonly used as chain guide material in milling/processing plants.
Lot cheaper than buying one from anywhere...'cuz it's FREE!
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
-
- Supporting Member III
- Posts: 1484
- Joined: 02:26 pm Jun 29 2005
- Country:
- Location: Alabama
I'll second the make your own wear blocks.
I made some out of some pretty good red stuff we have at work, it was used for stripper spring blocks in some punch and die sets. It's pretty hard, but rubbery.
On the other hand, if you buy an expensive chain and don't read the fine print, the master link that comes with it might be the kind that does not use a clip and you get to try to beat the ends of the pins mushroom shaped on the garage floor. Them ain't coming off!
It'll take a die grinder to get the chain off the bike when the time comes.
I made some out of some pretty good red stuff we have at work, it was used for stripper spring blocks in some punch and die sets. It's pretty hard, but rubbery.
On the other hand, if you buy an expensive chain and don't read the fine print, the master link that comes with it might be the kind that does not use a clip and you get to try to beat the ends of the pins mushroom shaped on the garage floor. Them ain't coming off!
It'll take a die grinder to get the chain off the bike when the time comes.
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
-
- Member
- Posts: 201
- Joined: 10:51 am Mar 09 2006
- Country:
- Location: Harrisburg, PA
Yeah I bought one of those by accident. Holds together well, but a total pain in the butt to assemble. I used an air hammer with a pointy bit to peen out the ends of the pins.KarlP wrote:I'll second the make your own wear blocks.
I made some out of some pretty good red stuff we have at work, it was used for stripper spring blocks in some punch and die sets. It's pretty hard, but rubbery.
On the other hand, if you buy an expensive chain and don't read the fine print, the master link that comes with it might be the kind that does not use a clip and you get to try to beat the ends of the pins mushroom shaped on the garage floor. Them ain't coming off!
It'll take a die grinder to get the chain off the bike when the time comes.
- Oldschool
- Supporting Member III
- Posts: 195
- Joined: 05:02 pm Nov 07 2006
- Country:
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
What did I miss? Who said that?FRP won't fix your sliver master link from happening
I don't know that it does or does not.
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
Gott'a watch that stereo stuff. You might find yourself saying, 'Harleys suck'.
Well...ok...I guess that's not a good example of stereo that isn't a fact....
I've wondered (maybe twice) if the FRP indeed fits a ringed chain master link or not. 'Fits' meaning does NOT wear the clip to nothing.
Someone that has one please say? Danfree?
Thanks.
Well...ok...I guess that's not a good example of stereo that isn't a fact....
I've wondered (maybe twice) if the FRP indeed fits a ringed chain master link or not. 'Fits' meaning does NOT wear the clip to nothing.
Someone that has one please say? Danfree?
Thanks.
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!
-
- Member
- Posts: 46
- Joined: 04:49 am Jul 02 2006
- Country:
- Location: North Florida
Well to be honest, I can't say for sure. While waiting for my forks and shock from MX Tech, I stripped down the bike to clean and grease everything. Also added some after market stuff like steering damper, bars, barkbusters, gnarly pipe (from krazyinski), tires, and the chain guide. So it has been literally on the stand since I bought the bike. I now have the tires on the floor and ready to set my sag and such. Long story even longer: On the stand, there are no clearance issues whatsoever. However, in the real world with the suspension being exercised and the chain slappin' time, I am not ready to stake my non-existent reputation on the FRP chain guide. But I am confident that it is better than stock. I hope to try everything out next weekend in the forest. Apalachicola, that is.
2008 Yam FZ6
2005 KDX 200
2005 KDX 200
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
It won't take but one ride to easily see if the link clip is rubbing. It'll be nice and shiny on the outside finger.
Re: 'I am not ready to stake my non-existent reputation...'
Aw c'mon! Where's your sense of adventure!!
I do it most every day!!!
Have a good ride! Sounds like you have a few new toys to 'evaluate'!!
Re: 'I am not ready to stake my non-existent reputation...'
Aw c'mon! Where's your sense of adventure!!
I do it most every day!!!
Have a good ride! Sounds like you have a few new toys to 'evaluate'!!
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!