Anyone run Jt Sprockets?

Got questions? We got answers....
Post Reply
User avatar
Ryan
Supporting Member II
Supporting Member II
Posts: 1047
Joined: 01:30 pm Sep 25 2005
Country:

Anyone run Jt Sprockets?

Post by Ryan »

Well i was going to order a primary Drive Kit but... they wont have them in until Mid-May which is a little too far away for me. I would like to get everything purchased for under $100 if possible. I was looking at a Jt Alloy sprocket that is only $35 and the front is $11. Which leaves me about $60 for the chain. I was going to get a parts unlimited if i can get it cheap enough. Does this sound like a good combo or can i get a better deal?
2001 kdx220

1987 honda xl250
User avatar
radonc73
Gold Member
Gold Member
Posts: 574
Joined: 01:45 pm Nov 03 2006
Country:
Location: NW Indiana
Contact:

Post by radonc73 »

Look on Monkeybutt.com from the links above. They have complete sets for around $95 before shipping. Maybe less, I usually get a set like that. I think that the wear would be the same for both sprockets from the same co. I don't have any facts to back that up just a personal prefrence. :mrgreen:
Riding is living everything else, is just waiting.
Master of the casual pace
83 KDX 200
93 KDX 250
84 YTM 225 DX 3-WHEELER
User avatar
2001kdx
Supporting Member I
Supporting Member I
Posts: 1522
Joined: 08:36 am Sep 23 2006
Country:
Location: Town of Montgomery, NY

Post by 2001kdx »

Ryan, I did the exact same thing as you a few months ago. I bought a $10 JT front Sprocket, and $32 Part U. Rear, and the $60 PU X-ring chain.

It's a great combo, it's held up so far.
User avatar
Ryan
Supporting Member II
Supporting Member II
Posts: 1047
Joined: 01:30 pm Sep 25 2005
Country:

Post by Ryan »

ok, i got a jt rear primary drive front and a decent chain. I hope it was worth the $120 i spent. I wish they had the primary drive stuff in stock, but that will be my next chain.
2001 kdx220

1987 honda xl250
saddletramp
Supporting Member
Posts: 275
Joined: 04:47 pm Oct 06 2006
Country:
Location: washington

Post by saddletramp »

I put a JT combo on my 87 200 that I traded off to the neighboor kid and just put JT set on my 2000 , no problems they seem like good steel sprockets.
2000 KDX 200 97 KX 125 Front End
1996 CR 250
03 RM 65 2000 YZ 80
IdahoCharley
Supporting Member II
Supporting Member II
Posts: 1005
Joined: 06:57 pm Mar 19 2005
Country:

Post by IdahoCharley »

I've also run the JT sprockets without problems and they last.
KTM 380EXC Mine
KDX 200 Mark's
TTR 125 L Wife's
KDX 200 Austin's
EC 300 Tyson's
WR430 Husky - mine
Post Reply