Master Link Question

Got questions? We got answers....
Post Reply
KDXSean
Gold Member
Gold Member
Posts: 107
Joined: 09:26 pm Nov 22 2004
Country: Canada
Location: Ottawa

Master Link Question

Post by KDXSean »

Just bought a new DID narrow "T-Ring" chain. Basically it's a narrow X-Ring.

The master link that came with the chain is a rivet connection, not the usual clip. Here's the link

http://www.didchain.com/install.htm

Anybody got any experience with the rivet master link instead of a clip?

Seems like a PITA if you have to grind off the master to take the chain off.

Thanks

Sean
User avatar
2001kdx
Supporting Member I
Supporting Member I
Posts: 1522
Joined: 08:36 am Sep 23 2006
Country:
Location: Town of Montgomery, NY

Post by 2001kdx »

My friend has one on his YZ250F. I've never asked him about it, but I've noticed it. I'll have to ask.
kelasaki
Member
Posts: 61
Joined: 07:39 am Jun 16 2005
Country:
Location: Central PA

Post by kelasaki »

A couple of pains with the rivet chain. The riveter tool to swage the pins, and having to grind it off to get the chain apart. You should be able to order a clip type master link from where you got the chain. And you were going to order a spare one for your tool pack anyway ... right? ;)
KarlP
Supporting Member III
Supporting Member III
Posts: 1484
Joined: 02:26 pm Jun 29 2005
Country:
Location: Alabama

Post by KarlP »

I got one of those "accidentally". I didn't read the fine print when ordering the chain.

You know how the clips wear thin on a standard Master Link?

It has been fine. I don't see why I would need to break the chain until it is time to replace, I hope.

I beat the rivets flat against an anvil on the garage floor. It sure ain't coming off, but you may want to find a more dignified method.
'08 KTM200xc
'99 CR/KDX Hybrid with that RB stuff done to it
KX100 for the boy
Post Reply