KDXRIDER.NET

The brackets that mount the uni-trac linkage to the frame and also mounts between the swing arm and engine. Will these interchange with a KX of similer years? What the deal is is that I have one that needs replacing (long story) I have found one that goes on a 94-96 KX125/250 but I can't find the part number to see if its the same. The part I need is 32037. I have looked at a few schematics but I cant find the KX part.

Thanks
Vinny

That picture doesn't show the brackets I'm talking about. I can't seem to find it in the KX schematics anywhere. Under the KDX schematics its listed under Frame fittings or frame fittments. Something like that. There are 2 of them, left and right. One shaped different than the other. The linkage itself accually bolts to them and that is what holds the linkage to the frame

Vinny

1993 KDX 200
32037-1535 left side
32037-1536 Right side

The reason you can't find this for the 94-96 KX 125/250 is that it is part of the frame for those years.

The KX 125/250 J series has those brackets (1992-1993)

KX125/250
32037-1581 LH
32037-1582 RH

So does the H series (1990-1991)

KX125/250
32037-1522 left
32037-1523 right

So does the G series (1989)

KX125 G 1989
32037-1529 left
32037-1530 right

KX250 1989
32037-1495 LH
32037-1496 RH

F series 1988
32037-1461 LH
32037-1462 RH

E2 KX125 & E1 KX250 (1987)
32037-1420 LH
32037-1421 RH

All the brackets look similiar in the diagram...but, they all have different part numbers.

Thanks Quailchaser! I wonder what the last four numbers designate? The guy selling the linkage and brackets mistakenly told me they would fit 94-96 KX 125/250. No wonder I couldn't find them.

Vinny

vinny wrote: I wonder what the last four numbers designate?

The first part of the number (the stuff before the -) is how KAW categorizes the part. The second part of the number (the stuff after the - ) designates the specific part in that category for a given application.