Front and rear KDX brakeline length
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
Front and rear KDX brakeline length
Does anyone have the opportunity to measure their H model brake lines for me please ?? I have lost my garage keys and can't get to my bike until sunrise to attack the locks with a grinder.
Any help would be most appreciated. You could just grab a piece of rope and run it along the line and then measure that. If not, no biggie I'll get in there tomorrow somehow.
Any help would be most appreciated. You could just grab a piece of rope and run it along the line and then measure that. If not, no biggie I'll get in there tomorrow somehow.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
- skipro3
- Gold Member
- Posts: 4329
- Joined: 11:58 pm Nov 04 2004
- Country:
- Location: BANNED FOR LIFE!!
- Contact:
Make sure you get the correct banjo's for the ends with the correct angle bend to the connection as well. I modded mine to have 20degree bend at the front master cylinder end so that it angles just slightly away from my bars. I did that because if you like your lever angled down and short bars, a straight shafted banjo can hit the bars or break on a crash when the lever assembly gets rotated into the bars.
Jerry
I'd rather be a smartass like carvr, than a dumbass like.... well, you fill in the blank!
I'd rather be a smartass like carvr, than a dumbass like.... well, you fill in the blank!
- strider80
- Supporting Member III
- Posts: 489
- Joined: 12:26 pm Jul 21 2006
- Country:
- Location: Bothell, WA
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
Not entirely sure to be honest. He may now I have given him the KDX lengths. I'd throw them a quick email to Nik Walker at info@pyramid-parts.com
I asked if they would work on a KDX and this was his reply;
if you let us know the length you need we will sort you out with that.
Kind regards,
Nik
AND
Yes we can sort you out with this no problem, if you just mention in your
paypal/payment that you need the K3 Kit (or mention your lengths) we will put the correct kit in.
I asked if they would work on a KDX and this was his reply;
if you let us know the length you need we will sort you out with that.
Kind regards,
Nik
AND
Yes we can sort you out with this no problem, if you just mention in your
paypal/payment that you need the K3 Kit (or mention your lengths) we will put the correct kit in.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
Thanks Jerry, I appreciate your guidance. Just curious how you bent yours as I think he has shipped them already ?? I'll send off an email and see if its not too late.skipro3 wrote:Make sure you get the correct banjo's for the ends with the correct angle bend to the connection as well. I modded mine to have 20degree bend at the front master cylinder end so that it angles just slightly away from my bars. I did that because if you like your lever angled down and short bars, a straight shafted banjo can hit the bars or break on a crash when the lever assembly gets rotated into the bars.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
These guys are the frikken best. They already shipped the longer KX front line but that doesn't matter as you can see....
Hi Trev,
I will get a K3 front hose in the post today, the rear is the same, if you could just pop the other front hose back in the envelope back to us it would be apretiated, and yes there is a 20° bend (approx) at the front master cylinder.
Let me know when you get them and how you get on with them, i will include an address label with the 2nd hose, just slap it on the envelope and stick the other front hose in.
Kind regards,
Nik
Who could ask for better....
If you are in the market for S/S lines you would be MAD not to see these guys.
Hi Trev,
I will get a K3 front hose in the post today, the rear is the same, if you could just pop the other front hose back in the envelope back to us it would be apretiated, and yes there is a 20° bend (approx) at the front master cylinder.
Let me know when you get them and how you get on with them, i will include an address label with the 2nd hose, just slap it on the envelope and stick the other front hose in.
Kind regards,
Nik
Who could ask for better....
If you are in the market for S/S lines you would be MAD not to see these guys.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
-
- Member
- Posts: 1
- Joined: 01:41 pm Mar 19 2017
- Country: United States
Front and rear KDX brakeline length
I know this post is 10 years old, but was wondering how your brake lines heald up? No problems with wear or leaking ? I'm getting ready to order a set, but don't want them to end up being junk. Thanks
-
- Member
- Posts: 334
- Joined: 01:19 pm Sep 21 2016
- Country: USA
- Location: Missouri USA
Re: Front and rear KDX brakeline length
I just ordered a front and rear set from Galfer. I don't know what lines everyone was referring to in this thread so I hope the Galfer lines are good. I did some searches before and found very little info and I decided I trust Galfer over any EBay item that doesn't list what brand they are.
2000 Kawasaki KDX220R
1996 Kawasaki KDX200
1996 Kawasaki KDX200
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Front and rear KDX brakeline length
Some pro MX teams run Galfer. They are very "name brand".
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 86
- Joined: 06:25 pm Jun 04 2016
- Country:
- Location: Eastern Victoria, Australia
Re: Front and rear KDX brakeline length
Galfer brake lines have a very good reputation in sport bike circles, I wouldn't think their quality would be any different for dirt bikes. Next purchase for my KDX is a set of HEL braided lines. Only because I put a set of them on my Ninja years ago and they have lasted really well.