KDXRIDER.NET

How often?
Which method do you use?
When I get around to it, this is what I will do for the pipe
http://www.piperepair.com/carbon.htm

For the silencer, here is what I've done last time:
wipe off as much spooge as possible (probably used some carb cleaner or sumthin), then scrubed with a wire bruch, wipped off and repacked .
Any suggestions?

Thx
Wilf

I usually do mine whenever it is dripping spooge from all the rivets and out the end cap

I take mine totally apart, removing all rivets so I can remove the turbine core, remove packing and lay all the pieces on my driveway. I then use a propane torch to burn off the spooge, pretty much have to get the metal glowing red hot. Then I douse parts with water to cool and go over each with a wire brush.

http://wibby.smugmug.com/gallery/2096184/1/43820096

The last time I repacked (couple months ago) I put all the parts in a big metal washtub and built a fire with credit card statements and junk mail that I needed to destroy. Got a few frowns from the neighbors but I got my s/a cleaned and my junk mail destroyed all at once

Yamaha Combustion Chamber Cleaner is probably the best way to clean your s/a but it's around $8 o $10 a can

Spray it on wait a little and wipe or rinse it off

It'll will even take the carbon off the head and piston just as easy

Filled my pipe with caustic soda and hot water and left it over night.Seems to work.