1990 KDX200 KIPS SETUP

Got questions? We got answers....
Post Reply
AlanABooth
Member
Posts: 2
Joined: 12:07 pm Dec 27 2006
Country:
Location: salisbury, MD

1990 KDX200 KIPS SETUP

Post by AlanABooth »

KIps
I'm rebuilding my sons 1990 kdx200. No problem figuring out the 12, 9 and three setup for the sub exhaust however how about the center ? do I install with the governor all the way out. Also looking through the exhaust rod in valves closed , Right? So I should see the valve cutouts exposed ? Seems open but when set as directed they face the exhaust port
Top
User avatar
kdxquebec
Supporting Member II
Supporting Member II
Posts: 1255
Joined: 07:18 am Nov 24 2004
Country:
Location: Québec:North Pole
Contact:
Contact kdxquebec

Post by kdxquebec »

:rolleyes:

http://www.geocities.com/a57ngel/moto/kips.html
'89 KDX 198cc '03 Gasgas Ec250 '13 Husaberg Te300
*CANADA* LEADING THE WORLD IN BEING JUST NORTH OF THE UNITED STATES.
Image
Top
AlanABooth
Member
Posts: 2
Joined: 12:07 pm Dec 27 2006
Country:
Location: salisbury, MD

Post by AlanABooth »

So when I push in on the governor rod the sub valve cutouts will be showing. This is the closed position ? I get excellent low rpm but flat high rpm.. Gonna check linkage from case to see If its turning the governor

Thanks any tips surely help
Top
Post Reply

Return to “KDX General Q&A”