Opinion on graphic
- m0rie
- Supporting Member I
- Posts: 2220
- Joined: 10:25 pm Nov 29 2004
- Country:
- Location: Crescent City, CA
- Mr. Wibbens
- KDXRider.net
- Posts: 4884
- Joined: 02:57 am Nov 07 2004
- Country:
- Location: Playing in the Poison Oak
- Contact:
Warning! This member tends to use sarcasm as a regular form of communication. If a post seems offensive, before you panic and fly off the handle, re-read the post and imagine it being said with a sideways grin.
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
((Bike Profile))
((Pics))
FIVE OUT OF FOUR PEOPLE DONUT UNDERSTAND FRACTIONS
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
Indawoods,
I take it you want to keep your existing graphics in place?
Here is what we can do
http://www.kdxrider.net/forums/modules. ... _photo.php
I take it you want to keep your existing graphics in place?
Here is what we can do
http://www.kdxrider.net/forums/modules. ... _photo.php
- thebleakness
- Member
- Posts: 535
- Joined: 02:08 am Sep 17 2006
- Country:
- Location: flagstaff arizona
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
They look SuHweeeeeT !!! Is it a big job to make a template for the H model radiator shrouds ?? I can post you a paper cut out easily enough if that helps. Not trying to pressure you into anything just chucking some ideas out there.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
I have no problem at all designing what fellow kdx owners want.
Lets just say that I will design these graphics and they should all have the "RIDER.NET" under the "KDX" badge. I will need help with the difference in models and what years they cover. I also may need some doner plastic so I can template them if anyone has extras.
We will need to lock down a generic KDX vertical layout and a horizontal
layout
Look at these
http://www.kdxrider.net/forums/modules. ... _photo.php
http://www.kdxrider.net/forums/modules. ... _photo.php
Anyone else familiar with vector based graphics???
We'll discuss the specifics later.
Lets just say that I will design these graphics and they should all have the "RIDER.NET" under the "KDX" badge. I will need help with the difference in models and what years they cover. I also may need some doner plastic so I can template them if anyone has extras.
We will need to lock down a generic KDX vertical layout and a horizontal
layout
Look at these
http://www.kdxrider.net/forums/modules. ... _photo.php
http://www.kdxrider.net/forums/modules. ... _photo.php
Anyone else familiar with vector based graphics???
We'll discuss the specifics later.
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
- radonc73
- Gold Member
- Posts: 574
- Joined: 01:45 pm Nov 03 2006
- Country:
- Location: NW Indiana
- Contact:
I would donate also. Those are great lookng and we can all support fellow KDXers and this site. Lets face it we pretty much all hate the early 90s graphics, they were great in their heyday but they went the way of the flannel and there time has past. I was looking to get new graphics so I would definately like these more than buying OEM graphics.
Riding is living everything else, is just waiting.
Master of the casual pace
83 KDX 200
93 KDX 250
84 YTM 225 DX 3-WHEELER
Master of the casual pace
83 KDX 200
93 KDX 250
84 YTM 225 DX 3-WHEELER
- Indawoods
- Creator and Founder
- Posts: 9951
- Joined: 09:59 am Jun 12 2003
- Country:
- Location: Midwest
I think an updates version of what is on my bike now.... like KDXRIDER.NET in place of KAWASAKI. I mean... it's green.... of course it is a Kawasaki!
*** Administrator //***
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
****'95 KDX 200/****
"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
- Jeb
- Gold Member
- Posts: 1894
- Joined: 08:01 pm Jul 14 2006
- Country:
- Location: Cincinnati / Northern Kentucky
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
Alright,
Whos gonna take up pattern making duties?
Just need 1 volunteer per type.
I'll give some general outlines on how to do it
and a mailing address of where to send it.
You still up for the duty, KDXer?
Even if we get a couple per different patterns from different members.
I can atleast compare them. Then I'll have to send them a pen plot to check my vector shape.
1st set of 250D graphics will be in production tomorrow!
So, there is 'E' and 'H' in the 200, 'A' for the 220.
Is there any difference in the shrouds from 95-05 for the 'H' model.
Does the 220 share rad shrouds with the 200H?
It seems that it is just E,H that need to be patterned?
Whos gonna take up pattern making duties?
Just need 1 volunteer per type.
I'll give some general outlines on how to do it
and a mailing address of where to send it.
You still up for the duty, KDXer?
Even if we get a couple per different patterns from different members.
I can atleast compare them. Then I'll have to send them a pen plot to check my vector shape.
1st set of 250D graphics will be in production tomorrow!
So, there is 'E' and 'H' in the 200, 'A' for the 220.
Is there any difference in the shrouds from 95-05 for the 'H' model.
Does the 220 share rad shrouds with the 200H?
It seems that it is just E,H that need to be patterned?
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
Instructions
pattern:
Tape some paper together (overlapping), tape front and back or if ya got bigger paper then great. Cut some 3/4" holes in the paper (3 or 4 total is fine). Place some tape over the holes so it will stick to the plastic and keep it from moving around while tracing. Make sure there is no waves in the paper. Pressing the paper around the contours will help you see what your tracing.
Next part is up to you depending on where your skills are...you can
do a rubbing or trace the edge by hand. We are looking for the edge
of the 'flat' and the horizontal body 'line' near the top of the shroud.
If you want to pattern the side plates(both) and other items too then great. My side plates are not identical.
The cleanest pattern(s) wins a prize!
Put your name on the pattern and make sure you have a return address on the envelope.
Send pattern(s) to:
Thomas Reid
1100 Marshall Rd. Suite A
Vacaville, CA 95687
Tape some paper together (overlapping), tape front and back or if ya got bigger paper then great. Cut some 3/4" holes in the paper (3 or 4 total is fine). Place some tape over the holes so it will stick to the plastic and keep it from moving around while tracing. Make sure there is no waves in the paper. Pressing the paper around the contours will help you see what your tracing.
Next part is up to you depending on where your skills are...you can
do a rubbing or trace the edge by hand. We are looking for the edge
of the 'flat' and the horizontal body 'line' near the top of the shroud.
If you want to pattern the side plates(both) and other items too then great. My side plates are not identical.
The cleanest pattern(s) wins a prize!
Put your name on the pattern and make sure you have a return address on the envelope.
Send pattern(s) to:
Thomas Reid
1100 Marshall Rd. Suite A
Vacaville, CA 95687
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
I'm on the job. Would you like me to make a copy of my existing graphics outline or the radiator shroud ?? Or both ?? I have the same N-style graphics as Vince's ride. Let me know when you can and I'll work on it tonight.
Alternatively I can ebay a set of rad shrouds and side plates. Your call, I'm easy....
H MODEL 200-220'S HAVE THE SAME SHROUDS ETC...
Alternatively I can ebay a set of rad shrouds and side plates. Your call, I'm easy....
H MODEL 200-220'S HAVE THE SAME SHROUDS ETC...
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
I HAVE MADE ONE TEMPLATE OFF THE RIGHT HAND RAD SHROUD oops. I will make one of the graphic and also the shroud itself. Do you need a left hand one done also or are you able to just mirror the template ?? I'm off to make the graphic template, it's only 2.30am I still got a few hrs. hehehe.
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
KDXer is a self motivated man!
I also just noticed your down under. Every place I go in this world people always mistake me for a Aussie......"hey mate" is all I hear, especially in Bali.
Flip your pattern and see if it is identical on other side of bike. I use a $3,000 vinyl design program that does allot more than just mirror
My side plate was .25-.375" taller on the exhaust side (more curved) but that is on the 250.
The trace of the graphic itself is a great idea!
Good job!
I also just noticed your down under. Every place I go in this world people always mistake me for a Aussie......"hey mate" is all I hear, especially in Bali.
Flip your pattern and see if it is identical on other side of bike. I use a $3,000 vinyl design program that does allot more than just mirror
My side plate was .25-.375" taller on the exhaust side (more curved) but that is on the 250.
The trace of the graphic itself is a great idea!
Good job!
- thebleakness
- Member
- Posts: 535
- Joined: 02:08 am Sep 17 2006
- Country:
- Location: flagstaff arizona
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
Hey people,
KDXer...you still asleep or did some coffee do the trick
Here is the first shroud set
Too bad my black cartridge came up short and snapped within inches of the end! I realized it was on the order board after the fact.
Setting up the file was crazy! After a while it all looks alike, just a bunch of lines. Took 3 hours.
Oh well, I need to weld a small crack in my shroud before it gets a decal applied to it. So much to do, so little time!
KDXer...you still asleep or did some coffee do the trick
Here is the first shroud set
Too bad my black cartridge came up short and snapped within inches of the end! I realized it was on the order board after the fact.
Setting up the file was crazy! After a while it all looks alike, just a bunch of lines. Took 3 hours.
Oh well, I need to weld a small crack in my shroud before it gets a decal applied to it. So much to do, so little time!
Last edited by tha_reids on 03:38 am Dec 29 2006, edited 1 time in total.
- KDXer
- Supporting Member
- Posts: 2845
- Joined: 12:11 pm Nov 12 2004
- Country:
- Location: Sydney, Downunder
Hehe, I'm back up and working on it again.
Those graphics look sweet, in paticular the swingarm decals.
Any chance you can print green or is that not an option, just curious ??
Cheers,
Trev...
Those graphics look sweet, in paticular the swingarm decals.
Any chance you can print green or is that not an option, just curious ??
Cheers,
Trev...
"I want to die peacefully in my sleep like my grandfather, not screaming in terror like the passengers in his car."
-
- Supporting Member II
- Posts: 71
- Joined: 12:38 pm Dec 20 2006
- Country:
- Location: Bay area
I have a lime green resin cartridge but haven't checked to see how close it matches Kawi green. I would have to re-roll it onto a new cartridge but I had planned on that already. Gerber forced a product upgrade on us that left me with $3,000 worth of resin cartridges that won't work until I have one of my guys re-roll it to a new style cartridge. The bastards!
Oh well
The silver looks much better than it shows in the pic. I keep using the crappy camera...the one that just lays around the house. My wife uses it daily every time the cat does something cute
Let me know how the pattern turns out. I'm sure it will be great!
Hey KDXer.........you ever run over a croc with your KDX? Just curious
Oh well
The silver looks much better than it shows in the pic. I keep using the crappy camera...the one that just lays around the house. My wife uses it daily every time the cat does something cute
Let me know how the pattern turns out. I'm sure it will be great!
Hey KDXer.........you ever run over a croc with your KDX? Just curious