Page 1 of 1
boyesen reeds?
Posted: 10:03 pm Sep 07 2006
by Sky.A
would just adding the boyesen reeds help much ?anyone with any knowledge on this ? TIA
Posted: 10:13 pm Sep 07 2006
by Indawoods
Yes, they help alot... especially with a properly jetted carb and a pipe.
Boyesen 607's is what is in my brothers bike and she runs real real good!
Posted: 03:13 am Sep 08 2006
by Mr. Wibbens
Yup, like night and day!
Posted: 08:03 pm Feb 05 2007
by cfspawn
What reed setup fits and improves the the 89-94 series the best?
Posted: 08:16 pm Feb 05 2007
by Indawoods
Saxaphone reeds I believe!
I had DFII's in mine when I had it... worked real well. I'm sure DFII's DFIII's or 607's would all be an improvement.
Posted: 09:39 pm Feb 05 2007
by AZRickD
Having just done a comparions of the Boyesens vs the V-Force IIIs, I'd say the VFIII has a slight edge on the Boyz.
Rick
Posted: 06:24 am Feb 06 2007
by cfspawn
Might be a silly question but. do these setups come with the whole cage assembly? or can you just change the reeds?
Posted: 07:30 am Feb 06 2007
by Tusk
I have a set of just the reeds spawn.
I haven't installed them yet as my bike runs pretty good and I feared messing with the jetting. I just have open air box and FMF pipe/silencer with stock jetting.
As it's 7 degrees out right now, I may just find time to put them in to keep PMS (Parked Motorcyle Syndrome) away. The street bikes need maintainence as well.
Posted: 09:34 pm Feb 06 2007
by Mr. Wibbens
cfspawn wrote:Might be a silly question but. do these setups come with the whole cage assembly? or can you just change the reeds?
Boyesen reeds work with your stock cage, VFII and III replace the stock cage
Posted: 09:43 pm Feb 06 2007
by Jeb
The power reeds will be a noticeable and very nice addition to your bike.
Posted: 10:07 pm Feb 06 2007
by cfspawn
Yeah sweet just wanted to check incase im going into overkill as i havent done any Head or Carb mods as yet, thru RB
Posted: 10:20 pm Feb 06 2007
by AZRickD
I did not re-jet when I swapped from the Boyesens to the VFIII, and I don't think that QuailChaser re-jetted when he went from stock to the Boyesens.
Rick
Posted: 10:22 pm Feb 06 2007
by Mr. Wibbens
AZRickD wrote:I did not re-jet when I swapped from the Boyesens to the VFIII, and I don't think that QuailChaser re-jetted when he went from stock to the Boyesens.
Rick
Not that, that really means anything
Posted: 09:24 am Feb 07 2007
by AZRickD
Not that, that really means anything
Would it mean anything if I included positive plug-chop results?
Rick
Posted: 06:49 pm Feb 07 2007
by Mr. Wibbens
It might
Posted: 08:20 pm Feb 07 2007
by AZRickD
Well, then. I'll <coff> let you know when I, uh, get around to those.
Rick
Pwned by Wibbens
Posted: 11:43 pm Feb 07 2007
by jhard527
Any suggestions for the best reed/jetting setup for an 86 200 with a stock pipe & carb?