I am working on an older KDX 200 1991 for a freind. He picked it up cheap cheap so Im in the rebuild process for him. I have a couple questions hope you guys can help. Is that bulky chain gaurd assembly necessary on this model or can it be thrown to the wind. Also the Front forks, does anyone have the proper fuild level spec for these.
Thanks again in advance for your help.
BILL
KDX CHAIN GAURD AND FORK OIL
- Photoguy
- Supporting Member I
- Posts: 19
- Joined: 05:06 pm Jul 07 2006
- Country:
- Location: Cinti Ohio
KDX CHAIN GAURD AND FORK OIL
Last edited by Photoguy on 05:45 pm Aug 31 2006, edited 1 time in total.
- m0rie
- Supporting Member I
- Posts: 2220
- Joined: 10:25 pm Nov 29 2004
- Country:
- Location: Crescent City, CA
- m0rie
- Supporting Member I
- Posts: 2220
- Joined: 10:25 pm Nov 29 2004
- Country:
- Location: Crescent City, CA
If your talking about the white chain guard above the swing arm then you can pull it off. I don't know the spec for the forks off the top of my head but the last time I rebuilt mine I set my oil level @ 110mm from the top of the full compressed fork with no spring in the tube.
1989 KDX 200
2007 TTR-50E
2007 TTR-50E
- Photoguy
- Supporting Member I
- Posts: 19
- Joined: 05:06 pm Jul 07 2006
- Country:
- Location: Cinti Ohio
- motofox2006
- Member
- Posts: 151
- Joined: 07:21 pm Aug 13 2006
- Country: