KDXRIDER.NET

It might be my clutch plates but it wouldn't be because ive stuck 10w-40 four stroke engine oil it would it

Your clutch basket is probably worn and the plates are hanging up.

what you mean hanging up

The clutch plate fingers have to slide on the aluminum clutch basket, over time grooves start forming and do not allow them to slide. You need to dissasemble the clutch and file the clutch basket. It will be obvious if you take it apart.

motofox2006 wrote:It might be my clutch plates but it wouldn't be because ive stuck 10w-40 four stroke engine oil it would it

NYKDXer used the 4 Stroke Crap & the same happened to him, Put another fluid in it.

Thanks for the info ill try the oil first. Then if that doesnt work ill check the clutch basket.

Thanks all

A cheap easy oil for the tranny that works well is 15w-40 diesel oil like Chevron Delo 400, Shell Rotella or Amsoil diesel synthetic (what I use, more expensive). But that is only my opinion, a lot of oils work well.

What you mean tranny??????

Thank you for your help

Yes I also put 4 stroke oil in my bike and the plates stuck also when i tried to kick it in gear it would lunge forward. Thought my clutch was gone but i put in some 10-40 rode it for a while then changed it again and it seems to be ok now. I don't remember which 4 stroke oil it was but if i do I'll post it

ok i used motul 10w-40 4 stroke oil and mines creeping forward.

Ill change the oil today

See if that fixes it. Motul does make "transoil" designed specifically for 2-stroke trannies, and it's good stuff.

Adjust it !!!!!!!

have done and it6s not the problem ive also tryed the oil and it appears to be something to do with my clutch thanks for all the help guys