Preload spacer size

Got questions? We got answers....
Post Reply
Conorride
Member
Posts: 1
Joined: 08:33 pm Jan 06 2006
Country:

Preload spacer size

Post by Conorride »

What size PVC should i use to make a preload spacers? I have stock KDX springs i think, i bought the bike used and am not sure if i have stocks or softer than stock. I weigh around 200lbs. Also the rear is waaaay to soft also, so what weight spring should i be using?

Thanks much, Conorride
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

1" Schedule 40 PVC...

Your current 5.0 spring should work fine... just need to set your sag and clickers to taste IF the shock is in good shape. Your sounds blown... You may need to rebuild it. You can get a 5.2 spring if you can't get the sag to come out right.
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
Post Reply