KDXRIDER.NET

Do you know a internet site or can you explain to us how to do the carb vent tubes mod to prevent bogging or water suck when we cross deep rivers or water holes.

Somebody told me to to buy a little T in plastic but i dont know more about this.

Thanks a lot.

Basically you get some plastic T's and cut the tubes coming out of your carb, put the T's in and then run one side down to the bottom of the bike like usual and run another line off the other side up into the airbox.

On the 3 tubes?

Yep.

So all three tubes run into the one T then run off to the drain off period.?

No each tube gets cut and has a T inserted into it. When your done there should be three tubes running to the airbox and three down by the shock.