2005 220 with the pwk 33mm carby.
Where can I get the clip for the needle jet?
Thanks
I need a new clip for the needle jet
-
- Member
- Posts: 186
- Joined: 08:15 pm Mar 05 2006
- Country:
- Location: Jamaica, Vermont
- RBD
- Gold Member
- Posts: 210
- Joined: 02:00 am Jan 18 2005
- Country:
- Location: Portland, Oregon USA
- Contact:
Silly question, but have you tried any of the local M/C shops in your area? Any of the different brands of motorcycles that use Keihin PWK, PWM, PE and PJ carbs, these clips will work for you.
Please do not go to the hardware store and find something close - it will not be close enough! I have seen this way too many times, people that do this end up ruining the needle or breaking it.
The stock clip is .3 mm thick (.0118"). These clips are $1.50 ea.
Thank you,
Ron
Please do not go to the hardware store and find something close - it will not be close enough! I have seen this way too many times, people that do this end up ruining the needle or breaking it.
The stock clip is .3 mm thick (.0118"). These clips are $1.50 ea.
Thank you,
Ron
-
- Supporting Member II
- Posts: 1455
- Joined: 06:54 pm Aug 08 2005
- Country:
- Location: Orange County-New York
- Contact:
Geesh Ron, I was going to recommend Solder
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
-
- Member
- Posts: 186
- Joined: 08:15 pm Mar 05 2006
- Country:
- Location: Jamaica, Vermont
What brought this on is the heat. I needed to raise the clip from the 3rd to the 2nd position 'cause I was getting a little sputter in the 1/4 to 3/4 roll-on throttle range. Really noticed it in mellow sections and dirt roads the other day on a killer route-sheet ride in southern Vt. I went to move the clip yesterday and spread it too much when I put it on the 2nd position and it tweaked so half of it went back on to the 3rd. Tried to close it back up with the needle nose and I bent it a little. Now I don't trust it. Thank god I don't have one minute to ride for the next couple of days.
Green Hornet; Your bike reg'd? Come on up. The ride we did the other day was awesome. NETRA Springfield, VT Loop. 70.4 miles. The first half is good and technical due to the heavy, flooding rains we've had. Some of the trails have been turned into stream beds from flash floods so the KDX loves it! My brother-in-law is running a trials tire on the back of his Gas Gas and he was diggin' it.
Green Hornet; Your bike reg'd? Come on up. The ride we did the other day was awesome. NETRA Springfield, VT Loop. 70.4 miles. The first half is good and technical due to the heavy, flooding rains we've had. Some of the trails have been turned into stream beds from flash floods so the KDX loves it! My brother-in-law is running a trials tire on the back of his Gas Gas and he was diggin' it.
-
- Supporting Member II
- Posts: 1455
- Joined: 06:54 pm Aug 08 2005
- Country:
- Location: Orange County-New York
- Contact:
I have to get up there. Yeah I have Reg. as MC not ATV
Find the DMV Clerk with the Hangover & your set
Find the DMV Clerk with the Hangover & your set
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
-
- Supporting Member II
- Posts: 1455
- Joined: 06:54 pm Aug 08 2005
- Country:
- Location: Orange County-New York
- Contact:
Just tell the parts counter you need a Needle Clip for a PWK Carb. If he needs part number, then go to a different shop
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092
http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
- canyncarvr
- Gold Member
- Posts: 6943
- Joined: 01:07 pm Nov 05 2004
- Country: US
- Location: The Mythical State of Jefferson
Agreed.
If a bike shop can't get you a clip for a Keihin needle with you ASKING for a clip for a Keihin needle, that isn't much of a shop.
Still, if you wish:
Honestly, have you not used web resources for getting Kawasaki PNs before?
92037-1401 CLAMP,JET NEEDLE
If a bike shop can't get you a clip for a Keihin needle with you ASKING for a clip for a Keihin needle, that isn't much of a shop.
Still, if you wish:
Honestly, have you not used web resources for getting Kawasaki PNs before?
92037-1401 CLAMP,JET NEEDLE
Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis
bike profile: !clicky!