D952

Got questions? We got answers....
Post Reply
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

D952

Post by Green Hornet »

Well, I put her on today. The 756 being 110/100 & 952 110/90. There is a difference in height & its a PAIN IN THE BALLS to get on (Shorter Side Wall Height) This tire better last longer like Dunlop says or I can not go through the mounting again :rolleyes: :mad:
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

Bikebandit.com is having a sale on the 952 right now for $49.50!

This is for the Dunlop 18" 110/90-18 Rear

http://www.bikebandit.com/partsbandit/p ... path~2.asp
Last edited by Indawoods on 07:34 pm Jun 08 2006, edited 1 time in total.
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

Slapped the 952 on my brothers new to him bike tonight. I must say.... I like it!

I should trade him rims.... :hmm:
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

Was it a bit of a PITA to mount also???
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

They all are... try a Maxxis 6001 sometime! :neutral:
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
User avatar
fuzzy
KDXRider.net
KDXRider.net
Posts: 3437
Joined: 01:29 pm Jun 18 2003
Country:
Location: Fredneck, MD

Post by fuzzy »

Oh man, those things really suck to mount! THe sidewall is so stiff I think you could run one of those flat.
'91 KDX 200 Project $300 KDX
'95 KDX 200 Project $600 KDX
'94 WR 250 Always a project
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

The 952 having a SHORTER side wall, made for LESS flexing during mounting
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

The 952 compound is a very nice compromise. Sticky and flexible enough but is harder to last.

Nice job Dunlop! :supz:
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

It looks so much wimpyerrrrrr than the 756 (Width & Height) I'll find out tomorrow how it holds up in rocks, mud and other unknown crap
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

Well, tried it today, it HOOKS UP EXCELLENT. Wet, muddy, slippery rocks, tree roots & Boulders on steept single track hills. Little sign of wear also. My steering stem/assembly loosened up & I did not realize until I was being pounded by the abouve. Kept making a CLANKING NOISE and could feel the front move like a bicycles frontend when it gets loose. Well exactly that. Had to pull out of the race after the 1st lap. Bike was very hard to control in the tight and suspension SUCKED because of the RAKE ANGLE. Check those things boyz & girlz, I was pissed & disappointed. This was the toughest HS I've been to too date.
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
canyncarvr
Gold Member
Gold Member
Posts: 6943
Joined: 01:07 pm Nov 05 2004
Country: US
Location: The Mythical State of Jefferson

Post by canyncarvr »

It may well be the sidewall that's the PITA part..but I've had different mounting hassles with different tires of the same make/model over the years. My 952 was no more a pain to put on than the 756's have been.

...maybe the bead slipped up and you didn't notice it. THAT'll give you a hernia.

re: front-end loose. Sorry to say it, but that's an indication of not being correctly seated on put-together (for one thing). There is no way it can get that loose unless:

Outer races weren't seated tight/right
Bearings weren't seated on install
Severe bearing failure
The spanner nut came loose

Riding with them loose of course is problematic. REAL easy to damage them that way.

Glad to be of good cheer for 'ya!

;)

Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis

bike profile: !clicky!
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

>|<>QBB<
canyncarvr wrote: re: front-end loose. Sorry to say it, but that's an indication of not being correctly seated on put-together (for one thing). There is no way it can get that loose unless:

Outer races weren't seated tight/right
Bearings weren't seated on install
Severe bearing failure
The spanner nut came loose


Glad to be of good cheer for 'ya!

;)
I suspect either or:
Outer races weren't seated tight/right
Bearings weren't seated on install
It was tight (I thought) when I put together. Well I'll find out soon enough this week. I believe I have to crank down & make sure its seeated, but first I have to check the bearings and race. I think the race may be beaeten a bit, I still have the new ones, so I'll put them in
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
canyncarvr
Gold Member
Gold Member
Posts: 6943
Joined: 01:07 pm Nov 05 2004
Country: US
Location: The Mythical State of Jefferson

Post by canyncarvr »

You're familiar with the seating method? Say if not...I won't repeat it if you are.

Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis

bike profile: !clicky!
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

>|<>QBB<
canyncarvr wrote:You're familiar with the seating method? Say if not...I won't repeat it if you are.
I'll re-read the post in the conversion forum. I did that last time, but I believe I will have to torque it more than I thought.

"put on the dust cap from the KDX and the stem nut from the KDX. Seat about 20 ft. Lb. of torque, loosen, then just past finger tight"

****, I know what I didn't dooo

%^#$%$stem nut from the KDX. Seat about 20 ft. Lb. of torque#$%#^$#%
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
canyncarvr
Gold Member
Gold Member
Posts: 6943
Joined: 01:07 pm Nov 05 2004
Country: US
Location: The Mythical State of Jefferson

Post by canyncarvr »

You didn't do...what? You didn't put ON the KDX stem nut?..or you just didn't torque it?

WHILE you are tightening the castellated (notched/spanner/toothed if you like...puLEEZE no one take me to task for what a castellated nut is this time? YOU know what I'm talking about!) nut/ring/fastener, rotate the stem assy back and forth to move the bearings during the tightening sequence. Once you have reached the initial torque value (before you loosen it) STOP rotating it, but DO apply upward pressure on the stem. Enough that it does not drop when you loosen the nut. Loosen as described, then good-n-finger tight.

IF you didn't seat the bearing with the 20ft/lbs...there's at least ONE (maybe the only one) of the problems.

Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis

bike profile: !clicky!
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

KDX stem nut

:roll:
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

:lol: Your lucky son!
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
User avatar
canyncarvr
Gold Member
Gold Member
Posts: 6943
Joined: 01:07 pm Nov 05 2004
Country: US
Location: The Mythical State of Jefferson

Post by canyncarvr »

Well, for pretty much nothing holding the whole front-end of your bike ON, it worked pretty good, 'eh?

Really, it was held on pretty good..well, if you had the nut on top of the top clamp on. IF you had that on, the front-end wasn't likely to fall off...until that rattling stem beat the pee-wah out of the bearings and itself!

SSshhhhhh! I won't tell anybody if you don't!

Consider the source
Using a perceived level of knowledge to boost my self worth.
Non impediti ratione cogitationis

bike profile: !clicky!
Green Hornet
Supporting Member II
Supporting Member II
Posts: 1455
Joined: 06:54 pm Aug 08 2005
Country:
Location: Orange County-New York
Contact:

Post by Green Hornet »

The stem nut was nice & snug on top, just didn't use it to torque down the lower. Well got some fixing ta dooo
"Growing Old is Mandatory, Growing Up is Optional"
2008 KLX450R
2008 DRZ400SM
2005 KDX 220R
1985 KDX 200A3
2005 KLX 125L (SONS)
2003 KTM 50SX Pro Jr
B Senior # 254/0092

http://sponsorhouse.loopd.com/Members/R ... fault.aspx
Thanks to my 2008 Sponsers:
Dunlop, SteelMX, Amsoil, Simpson, Pro Works Racing, Pro Moto Billet, SLAP Energy,Boyesen, Rhino Stands, SixSixOne/SunLine Moto for your support.
John W Read Jr
User avatar
Indawoods
Creator and Founder
Creator and Founder
Posts: 9951
Joined: 09:59 am Jun 12 2003
Country:
Location: Midwest

Post by Indawoods »

Get 'er squared away?
*** Administrator //***
****'95 KDX 200/****

"People ate cows a thousand years ago for the same reason we eat them now. Cause they are easy to catch.We're not savages,we're just lazy. A cheetah could taste like chocolate heroin. But will never know. Those bastards are fast!!! "
Post Reply