KDXRIDER.NET

Hello fellow KDXers:

This past summer I had a friend of mine re jet my 2004 KDX200 it ran pretty good. Later I did a top end rebuild, the cylinder was in fairly poor condition. Significant pitting/deterioration of the electro-fusion coating. Piston was in very good condition.

I had the cylinder replated and I'm ready to reassemble the top end.

Question: Will I need to rejet my bike again?

I wouldn’t worry about it or change anything for now. Once you’re able to start ripping it, you’ll know right away. It might run better than ever.