H series Kdx 200/220 exhaust port/flange size
-
JZ05220r
- Supporting Member II
- Posts: 569
- Joined: 12:36 pm Mar 28 2021
- Country: United States
H series Kdx 200/220 exhaust port/flange size
Does anyone know exactly what the exhaust port size is on a kdx 200/220. I believe it’s 36mm but not 100 percent sure. I need mine repaired. Thank you
2005 KDX220r 1991 KDX200 2022 KTM 500excf
-
Molly's 70
- Platinum Member
- Posts: 568
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
Re: H series Kdx 200/220 exhaust port/flange size
I have a stock 220 H cylinder on the shelf. How should I measure it? I have calipers in millimeter.
If you lend someone $20, and never see that person again, it was probably worth it.
-
JZ05220r
- Supporting Member II
- Posts: 569
- Joined: 12:36 pm Mar 28 2021
- Country: United States
Re: H series Kdx 200/220 exhaust port/flange size
Oh cool. It’s just the ID of the exhaust port/outlet. I’m looking for the measurement in mm. Thank youMolly's 70 wrote: ↑02:06 pm Jul 29 2023 I have a stock 220 H cylinder on the shelf. How should I measure it? I have calipers in millimeter.
2005 KDX220r 1991 KDX200 2022 KTM 500excf
-
Molly's 70
- Platinum Member
- Posts: 568
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
Re: H series Kdx 200/220 exhaust port/flange size
Just a quick measurement with dial caliper shows 36-37mm exhaust port & 41-42mm for the pipe area.
If you lend someone $20, and never see that person again, it was probably worth it.
-
JZ05220r
- Supporting Member II
- Posts: 569
- Joined: 12:36 pm Mar 28 2021
- Country: United States
Re: H series Kdx 200/220 exhaust port/flange size
Thank you! I meant the area where the exhaust gets pushed in on the cylinder btw. I can see my terminology was alittle off.Molly's 70 wrote: ↑02:35 pm Jul 29 2023 Just a quick measurement with dial caliper shows 36-37mm exhaust port & 41-42mm for the pipe area.
2005 KDX220r 1991 KDX200 2022 KTM 500excf