1987 KDX200 flywheel won’t come off
-
- Member
- Posts: 6
- Joined: 12:05 pm Aug 20 2020
- Country: United States
1987 KDX200 flywheel won’t come off
I just bought an 87 kdx200 and realized that my stators could be busted but I can’t remove them or anything since my flywheel won’t come off. Any suggestions on how to do it?
- KDXGarage
- KDXRider.net
- Posts: 14068
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1987 KDX200 flywheel won’t come off
Welcome to kdxrider.net.
Get a steering wheel puller, some washers and a couple of long 6 mm bolts. Grease the end of the bolt in the crankshaft. Even better is to replace the stock bolt with one from a hardware store (metric socket head) and let the puller shaft turn on that instead of the stock bolt.
Get a steering wheel puller, some washers and a couple of long 6 mm bolts. Grease the end of the bolt in the crankshaft. Even better is to replace the stock bolt with one from a hardware store (metric socket head) and let the puller shaft turn on that instead of the stock bolt.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 6
- Joined: 12:05 pm Aug 20 2020
- Country: United States
Re: 1987 KDX200 flywheel won’t come off
Thank you. I’ll try that and if this isn’t surface rust I think I’ll get a new one