2001 kdx 200
- doakley
- Gold Member
- Posts: 1241
- Joined: 02:58 pm Mar 10 2016
- Country:
Re: 2001 kdx 200
Rack doesn't move much actually. If it rotates up and the bike runs normally it may be fine. Still, I'd probably clean the PV thoroughly. WD 40 is a band aid at best.
-
- Member
- Posts: 90
- Joined: 09:36 am Feb 06 2017
- Country: Norway
Re: 2001 kdx 200
yes sure I agree, I will take the whole cylinder/kips off soon, but what I dont understand is that I see these youtube videos with the rack turning more than mine does and bike is running like it was again ? know what I mean?
KDX 200, 2001 model
- doakley
- Gold Member
- Posts: 1241
- Joined: 02:58 pm Mar 10 2016
- Country:
Re: 2001 kdx 200
I do, but it does sound like you should service it.
-
- Member
- Posts: 90
- Joined: 09:36 am Feb 06 2017
- Country: Norway
Re: 2001 kdx 200
are all the power valve / kips parts still available from kawasaki for the H(95-06) model?
KDX 200, 2001 model
-
- Member
- Posts: 90
- Joined: 09:36 am Feb 06 2017
- Country: Norway
Re: 2001 kdx 200
Uppdate.my exhaust valve rod with the Oring(pipe side.) moves slow and a bit hard, is it normal, I have cleaned it. any info on that on here? thanks
KDX 200, 2001 model
- SS109
- KDXRider.net
- Posts: 5795
- Joined: 05:11 am Aug 23 2009
- Country: USA
- Location: Tucson, AZ, USA
- Contact:
Re: 2001 kdx 200
No, it should be smooth and move easily if you are moving just the rod and sub-valve by themselves.
Youtube Channel: WildAzzRacing
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
AZ State Parks & Trails OHV Ambassador - Trail Riders of Southern AZ
Current KDX: '98 KDX220
Old KDX: '90 KDX200 -White/Blue
'11 GasGas EC250R
-
- Member
- Posts: 90
- Joined: 09:36 am Feb 06 2017
- Country: Norway