Page 1 of 1

Kdx250 aftermarket exhaust FMF fatty

Posted: 07:37 am Jan 23 2020
by Stevetooms
Hey guys does anyone know how I fit and aftermarket exhaust onto my kdx250 1991 sr model Please My bike has two studs and a manifold fitting and the FMF pipes come with spring push fitting so I dont know how to fit it to the bike can anyone help me please thanks in advance

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 08:18 am Jan 23 2020
by 6 Riders
You need an SR exhaust, the exhaust you have won't work

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:00 am Jan 23 2020
by KDXGarage
I once saw someone post about his SR 200 or 250 (sorry, can't remember which) that had the different fitting. He cut the ends off the stock pipe and the aftermarket pipe, then welded the stock end onto the aftermarket pipe.

Otherwsie, I have never read of someone making a non-SR pipe fit onto an SR.

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:09 am Jan 23 2020
by KDXGarage
You made three posts asking the same question. May I ask why? Please don't do that again.

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:38 am Jan 23 2020
by Stevetooms
Ok that's great thanks for your help pal

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:39 am Jan 23 2020
by Stevetooms
KDXGarage wrote: 09:00 am Jan 23 2020 I once saw someone post about his SR 200 or 250 (sorry, can't remember which) that had the different fitting. He cut the ends off the stock pipe and the aftermarket pipe, then welded the stock end onto the aftermarket pipe.

Otherwsie, I have never read of someone making a non-SR pipe fit onto an SR.
Ok thats great thanks for your help pal

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:43 am Jan 23 2020
by Stevetooms
KDXGarage wrote: 09:00 am Jan 23 2020 I once saw someone post about his SR 200 or 250 (sorry, can't remember which) that had the different fitting. He cut the ends off the stock pipe and the aftermarket pipe, then welded the stock end onto the aftermarket pipe.

Otherwsie, I have never read of someone making a non-SR pipe fit onto an SR.
Do you know where I can get and aftermarket sr model pipe please

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:45 am Jan 23 2020
by Stevetooms
Do you know where I can get hold of an aftermarket sr model pipe please

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:46 am Jan 23 2020
by KDXGarage
Sorry. I do not know if an SR aftermarket pipe exists. The SR model was never sold in any form in the USA. Since most people on this forum are from the USA, it is tough to know much about the SR models for USA people.

You don't have to make two posts to thank two people. :grin: You can just say thanks person 1 and person 2 if you want to thank them. :grin:

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:49 am Jan 23 2020
by Stevetooms
Ok thanks

Re: Kdx250 aftermarket exhaust FMF fatty

Posted: 09:55 am Jan 23 2020
by KDXGarage
Good luck with it. Sorry that a "bolt-on" solution does not seem to be readily available.