Jetting for 9000 ft elevation
-
- Member
- Posts: 41
- Joined: 09:46 pm Dec 10 2018
- Country: Usa
Jetting for 9000 ft elevation
Hi all, I'm going to Taylor park co this summer to ride. Anyone know a good starting point for jetting a 220 with rb head and carb, fmf desert pipe?
-
- Supporting Member II
- Posts: 262
- Joined: 06:23 pm Jul 24 2017
- Country: USA
Re: Jetting for 9000 ft elevation
https://thumpertalk.com/forums/topic/49 ... -database/
This may help. There’s a jetting thread in here too. Scroll down a bit on the main page.
This may help. There’s a jetting thread in here too. Scroll down a bit on the main page.
-
- Member
- Posts: 41
- Joined: 09:46 pm Dec 10 2018
- Country: Usa
Re: Jetting for 9000 ft elevation
Thanks Vossman for the quick reply. I used the search bar and didn't come up with anything. I hate my damn phone and my technological ineptitude. I will check your suggestions.
Glenn
Glenn
-
- Supporting Member II
- Posts: 262
- Joined: 06:23 pm Jul 24 2017
- Country: USA
- ericr
- Gold Member
- Posts: 246
- Joined: 06:57 pm Nov 06 2017
- Country: USA
- Location: Gig Harbor, WA
Re: Jetting for 9000 ft elevation
At 7,000 ft on my KDX220 with the same RB mods but a woods pipe, I'm using a 38 PJ, DEK clip 3, 148 main with 50:1 fuel. This works for me, but I encourage you to do a leak down test and follow the jetting guide for your own particular bike.
'02 KDX 200, '02 KDX 220 - My restoration thread
-
- Member
- Posts: 41
- Joined: 09:46 pm Dec 10 2018
- Country: Usa
Re: Jetting for 9000 ft elevation
Thanks vossman and ericr.
-
- Supporting Member II
- Posts: 262
- Joined: 06:23 pm Jul 24 2017
- Country: USA