1990 kdx200
-
- Member
- Posts: 22
- Joined: 05:20 pm Mar 07 2018
- Country: Canada
1990 kdx200
Hi everyone I picked up a 1990 kdx200 last winter has a project and I have no idea but it seems the rear wheel is not sitting right the bike is not has high as should be can anyone tell me where to look or how the linkage is supposed to be hooked up
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 kdx200
Welcome to kdxrider.net.
I would definitely check all the linkagr bearings to make sure none are binding. It surely looks like it is not setting correctly.
I would definitely check all the linkagr bearings to make sure none are binding. It surely looks like it is not setting correctly.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 22
- Joined: 05:20 pm Mar 07 2018
- Country: Canada
Re: 1990 kdx200
Where would the cheapest place be to get rebuild kits for linkage or what options do I have also going to rebuild swingarm I guess while I got it apart
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 kdx200
I am not sure where in Canada is cheapest.
It looks like it was setting normally in the "before" picture. What happened? Reassembly error?
It looks like it was setting normally in the "before" picture. What happened? Reassembly error?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 22
- Joined: 05:20 pm Mar 07 2018
- Country: Canada
Re: 1990 kdx200
It was sitting nice before I took it apart but now it’s not and it’s definitely something stupid I don’t see but I am assuming yes it was reassembly error lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 kdx200
Sometimes a "do over" is cheaper than new parts.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 22
- Joined: 05:20 pm Mar 07 2018
- Country: Canada
Re: 1990 kdx200
Do anyone have a picture of general layout for me to go by referencing
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 kdx200
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 1
- Joined: 07:06 am Oct 04 2018
- Country: Canada
1990 kdx200
If you do need new parts, in Canada it's almost impossible to beat Fortnine. Great service, returns and free shipping over $49. I use them almost exclusively now.
-
- Member
- Posts: 22
- Joined: 05:20 pm Mar 07 2018
- Country: Canada
Re: 1990 kdx200
Guys I have a couple problems noticed a few things missing during reassembly first can anyone snap a pic of how rear brake line is routed also do anyone have the 2 spacers that go into swingarm between the motor
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Molly's 70
- Platinum Member
- Posts: 568
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
1990 kdx200
The spacers for the swingarm part # 11012-1259 You need 4 of them.
If you lend someone $20, and never see that person again, it was probably worth it.