1990 kdx200

Got questions? We got answers....
Post Reply
Scottkdx1980
Member
Posts: 22
Joined: 05:20 pm Mar 07 2018
Country: Canada

1990 kdx200

Post by Scottkdx1980 »

Hi everyone I picked up a 1990 kdx200 last winter has a project and I have no idea but it seems the rear wheel is not sitting right the bike is not has high as should be can anyone tell me where to look or how the linkage is supposed to be hooked up Image


Sent from my iPhone using Tapatalk
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1990 kdx200

Post by KDXGarage »

Welcome to kdxrider.net.

I would definitely check all the linkagr bearings to make sure none are binding. It surely looks like it is not setting correctly.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Scottkdx1980
Member
Posts: 22
Joined: 05:20 pm Mar 07 2018
Country: Canada

Re: 1990 kdx200

Post by Scottkdx1980 »

Where would the cheapest place be to get rebuild kits for linkage or what options do I have also going to rebuild swingarm I guess while I got it apart


Sent from my iPhone using Tapatalk
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1990 kdx200

Post by KDXGarage »

I am not sure where in Canada is cheapest.

It looks like it was setting normally in the "before" picture. What happened? Reassembly error?
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Scottkdx1980
Member
Posts: 22
Joined: 05:20 pm Mar 07 2018
Country: Canada

Re: 1990 kdx200

Post by Scottkdx1980 »

It was sitting nice before I took it apart but now it’s not and it’s definitely something stupid I don’t see but I am assuming yes it was reassembly error lol


Sent from my iPhone using Tapatalk
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1990 kdx200

Post by KDXGarage »

Sometimes a "do over" is cheaper than new parts. :grin:
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Scottkdx1980
Member
Posts: 22
Joined: 05:20 pm Mar 07 2018
Country: Canada

Re: 1990 kdx200

Post by Scottkdx1980 »

Do anyone have a picture of general layout for me to go by referencing


Sent from my iPhone using Tapatalk
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: 1990 kdx200

Post by KDXGarage »

Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
solo 2
Member
Posts: 1
Joined: 07:06 am Oct 04 2018
Country: Canada

1990 kdx200

Post by solo 2 »

If you do need new parts, in Canada it's almost impossible to beat Fortnine. Great service, returns and free shipping over $49. I use them almost exclusively now.
Scottkdx1980
Member
Posts: 22
Joined: 05:20 pm Mar 07 2018
Country: Canada

Re: 1990 kdx200

Post by Scottkdx1980 »

Guys I have a couple problems noticed a few things missing during reassembly first can anyone snap a pic of how rear brake line is routed also do anyone have the 2 spacers that go into swingarm between the motor


Sent from my iPhone using Tapatalk
User avatar
Molly's 70
Platinum Member
Platinum Member
Posts: 563
Joined: 04:29 pm Jun 18 2017
Country: USA
Location: Wichita, Kansas USA

1990 kdx200

Post by Molly's 70 »

The spacers for the swingarm part # 11012-1259 You need 4 of them.
If you lend someone $20, and never see that person again, it was probably worth it.
Post Reply