Crankcase seals/bearings part numbers
-
- Member
- Posts: 430
- Joined: 07:51 am Dec 28 2017
- Country: thailand
- Location: Thailand
Crankcase seals/bearings part numbers
Going to pull the engine out this week and split the cases. Is anybody able to tell me the part numbers for crankcase seals and bearings please. I will go direct to a bearing shop that stocks quality koyo bearings. My bike is 1997 kdx220. Never split cases before, done a lot of research but anything in particular that you guys recommend to keep an eye on. Cheers
1999 KDX220SR (KDX220-B5)
- Molly's 70
- Platinum Member
- Posts: 563
- Joined: 04:29 pm Jun 18 2017
- Country: USA
- Location: Wichita, Kansas USA
Crankcase seals/bearings part numbers
Measure your new bearing's carefully. Once upon a time I rebuilt the bottom end on a Suzuki. The bearing's went in just fine, but they were just a little thick & the cases would not quite go back together. Close, but no cigar. I had to do it over. I have always used factory bearings since.
If you lend someone $20, and never see that person again, it was probably worth it.
-
- Gold Member
- Posts: 114
- Joined: 08:41 pm Jul 26 2009
- Country: Canada
- Location: Vancouver BC Canada
Re: Crankcase seals/bearings part numbers
The Bearing part # is 6305C3 and the seal size is 25x40x6 Double lip ,you might also be able to get the seals in either Viton or silicone,they are rated for higher temps..
02 KDX220