1st gear mystery

Got questions? We got answers....

1st gear mystery

Postby DirtDogs43 » 08:57 pm Apr 15 2018

Hello everyone,
I have a '96 KDX200. I have an issue when I'm in 1st gear. It feels like it slips in and out whenever I put a load on the engine. When I'm on level ground with the throttle steady it doesn't do it but if I gas it and it starts getting on the pipe it happens. Also, when I'm going up a steep hill it happens. By the way, it started doing this out of the blue. I drained the oil to see if there where any chunks of metal and found none. The oil looked "normal". It only happens in 1st. 2nd through 6th it doesn't do it at all. Thoughts anyone?
Thank you in advance for your replies.

Corey
DirtDogs43
Member
 
Posts: 3
Joined: 08:33 pm Apr 15 2018
Has thanked: 0 time
Been thanked: 0 time

1st gear mystery

Postby thirdgenlxi » 01:38 am Apr 16 2018

Rounded off gear dogs and/or damaged shift fork. Though generally either one will also take the other out as well
thirdgenlxi
Supporting Member I
Supporting Member I
 
Posts: 437
Joined: 12:09 am Mar 06 2015
Location: Lenoir, NC USA
Has thanked: 2 times
Been thanked: 42 times

1st gear mystery

Postby SS109 » 01:36 pm Apr 16 2018

Sadly, it means the cases have to be split, figure out what's wrong, find replacement part(s), and then reassemble the bottom end.
AZ State Parks OHV Ambassador - Trail Riders of Southern AZ
Current ride: '98 KDX220
Old ride: '90 KDX200 -White/Blue
User avatar
SS109
Platinum Member
Platinum Member
 
Posts: 3400
Images: 10
Joined: 05:11 am Aug 23 2009
Location: Tucson, AZ, USA
Has thanked: 49 times
Been thanked: 60 times

Re: 1st gear mystery

Postby koshari » 06:29 pm Apr 16 2018

are any of these parts interchangable with klx250?
koshari
Member
 
Posts: 52
Joined: 04:02 am Jul 26 2011
Has thanked: 1 time
Been thanked: 3 times

Re: 1st gear mystery

Postby thirdgenlxi » 08:00 pm Apr 16 2018

koshari wrote:are any of these parts interchangable with klx250?


Not likely.... The gear dogs are part of the trans gear itself..... I highly doubt They're the same size gear
thirdgenlxi
Supporting Member I
Supporting Member I
 
Posts: 437
Joined: 12:09 am Mar 06 2015
Location: Lenoir, NC USA
Has thanked: 2 times
Been thanked: 42 times

1st gear mystery

Postby DirtDogs43 » 09:17 pm Apr 16 2018

Thanks for your replies. I have a hunch that it is indeed rounded gear dogs and/or worn shift forks. Any way around it, the cases need to be split.
DirtDogs43
Member
 
Posts: 3
Joined: 08:33 pm Apr 15 2018
Has thanked: 0 time
Been thanked: 0 time

Re: 1st gear mystery

Postby KDXohio » 01:26 pm Apr 17 2018

I had a similar problem it affected 1st and second but was much worse in first, my powervalve actuator pin the rides in the governor broke and found its way to the back corner behind the shift shaft and wedged in with enough pressure to keep the shifter ratchet fromfully rotating the drum and resetting which allowed the drum to drop back under load.
1990 KDX200 FMF Fatty, Answer VFC silencer, Boysen rad valve, Wiseco Piston, KX125-J series KYB USD fork conversion, J series front brake assembly, air-box snorkel removed, Acerbis Headlight, KX450F Front fender, Pro Taper RM bend bars, ASV front Brake lever, MSR Clutch perch and lever, RB Head mod, 36mm PWK carb, Trail Tech Kickstand.
1983 Yamaha IT490 - Tag bars, .40kg fork springs, DG silencer, Decompression Valve, YZ Aluminum Kicker
1982 Yamaha IT175
1998 RM250 - 12oz FWW, full FmF exhst
User avatar
KDXohio
Supporting Member
 
Posts: 811
Images: 9
Joined: 06:04 pm Jun 19 2013
Location: Dayton, Ohio
Has thanked: 3 times
Been thanked: 22 times

Re: 1st gear mystery

Postby SS109 » 03:01 pm Apr 17 2018

KDXohio wrote:I had a similar problem it affected 1st and second but was much worse in first, my powervalve actuator pin the rides in the governor broke and found its way to the back corner behind the shift shaft and wedged in with enough pressure to keep the shifter ratchet fromfully rotating the drum and resetting which allowed the drum to drop back under load.

No doubt!

I would definitely look for something like this before splitting just to make sure something hasn't lodged itself in there causing the problem. Maybe you'll get lucky!
AZ State Parks OHV Ambassador - Trail Riders of Southern AZ
Current ride: '98 KDX220
Old ride: '90 KDX200 -White/Blue
User avatar
SS109
Platinum Member
Platinum Member
 
Posts: 3400
Images: 10
Joined: 05:11 am Aug 23 2009
Location: Tucson, AZ, USA
Has thanked: 49 times
Been thanked: 60 times

1st gear mystery

Postby DirtDogs43 » 09:46 pm Apr 17 2018

For sure I'll be investigating everything before splitting. Thanks again for all of your replies. :supz:
DirtDogs43
Member
 
Posts: 3
Joined: 08:33 pm Apr 15 2018
Has thanked: 0 time
Been thanked: 0 time


Return to KDX General Q&A

Who is online

Users browsing this forum: Baidu [Spider] and 4 guests