Kdx clutch problems

Got questions? We got answers....
Post Reply
Elijah
Member
Posts: 14
Joined: 07:40 pm Apr 04 2017
Country: United States

Kdx clutch problems

Post by Elijah »

So about a week ago I took my right side engine cover off to replace my kips pin. I put everything back together and I am at the clutch now. I am struggling with my clutch being to tight to pull in . The only way I can hemmget it the print holder nuts to hit 78 inchlb is when the screws bottom out and when it is like that the clutch lever is waaaayyyy to tight
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Kdx clutch problems

Post by bufftester »

Make sure you have all the spacers/washers in the right locations. It makes a difference when you reassemble the clutch. Did you check your spring free length? Some aftermarket springs will not work with the KDX even though they say they do, you have to check the length.
Elijah
Member
Posts: 14
Joined: 07:40 pm Apr 04 2017
Country: United States

Re: Kdx clutch problems

Post by Elijah »

I know the clutch springs are right because they worked before I took apart
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Kdx clutch problems

Post by KDXGarage »

So this is a reassembly issue, not a "something broke" issue??
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply