KDXRIDER.NET

ok,i have it on but want to make sure its on right,
first thing-i put grease on the axle before installing it.
second-when installing the thing for the mile counter i set the nub on the shock tube between the bigger gap.
i then tightned down to spec,but the mile counter thing spun a little.is that ok?i then put a dab of grease on the plate that holds the axle to the other side.did i miss anything?i dont think i did

doesnt sound like it. Seems like your good to go.

so its ok to put grease on the part of the axle were the pinch bolts go?or should that be re-installed dry?