When I measure my 95 carb inside diameter measures 36.2 mm.
Can someone verify what their stock one measures.
Trying to figure out if its stock or not.
Airbox side looks polished .
Thanks Sean
Stock H series 200 Carb ID
-
- Supporting Member I
- Posts: 18
- Joined: 08:39 am Nov 19 2012
- Country: USA
- Location: Cooleemee NC
- KDXGarage
- KDXRider.net
- Posts: 14063
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: Stock H series 200 Carb ID
You might find dimension on the Keihin site or Sudco, maybe jetsrus.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
- bufftester
- Platinum Member
- Posts: 3461
- Joined: 06:03 pm Oct 31 2012
- Country: USA
- Location: University Place, WA
Re: Stock H series 200 Carb ID
Where are you measuring the ID at? It should be measured at the slide (narrowest part of the carb throat, not at the end where the carb mounts to the boot). The PWK33 and 35 both share the same outside dimensions, which you can find on Sudco or JtsRUs or a google search