Stock H series 200 Carb ID

Got questions? We got answers....
Post Reply
slidinleft
Supporting Member I
Supporting Member I
Posts: 18
Joined: 08:39 am Nov 19 2012
Country: USA
Location: Cooleemee NC

Stock H series 200 Carb ID

Post by slidinleft »

When I measure my 95 carb inside diameter measures 36.2 mm.
Can someone verify what their stock one measures.
Trying to figure out if its stock or not.
Airbox side looks polished .
Thanks Sean
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: Stock H series 200 Carb ID

Post by KDXGarage »

You might find dimension on the Keihin site or Sudco, maybe jetsrus.
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: Stock H series 200 Carb ID

Post by bufftester »

Where are you measuring the ID at? It should be measured at the slide (narrowest part of the carb throat, not at the end where the carb mounts to the boot). The PWK33 and 35 both share the same outside dimensions, which you can find on Sudco or JtsRUs or a google search
Post Reply