Hi KDX Riders
I am lucky enough to have a very clean and smooth running 1988 KDX 200 which I have managed to put through a day time mot and I can now use her on the road, my question to the Forum is: "Does anyone know if I can use the Tako/Timer cable and the rotation bearing located on the right side of the Front wheel / fork for a Speedometre?" I would like to fit a Dial Speedo to the bike rather than a digital one.
Thanks for any tips or advice
Roadtrack79
speedo for 1988 KDX 200
-
- Member
- Posts: 2
- Joined: 04:18 pm Sep 12 2017
- Country: england
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: speedo for 1988 KDX 200
(moved to KDX General Q & A)
Welcome to the forums. Congratulations on your 1988.
I have never tried it, but I don't see how you could turn an electronic signal into a cable type setup. Have you looked to see if a 1989 - 1992 odo drive unit and cable would work with the 1988 wheel?
Welcome to the forums. Congratulations on your 1988.
I have never tried it, but I don't see how you could turn an electronic signal into a cable type setup. Have you looked to see if a 1989 - 1992 odo drive unit and cable would work with the 1988 wheel?
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 2
- Joined: 04:18 pm Sep 12 2017
- Country: england
Re: speedo for 1988 KDX 200
Hi Jason
Thank you your kind welcome and your help with my Speedo question [sorry for this late reply I have been away at the excellent VETS TWIN SHOCK WEEKEND AT FARLEIGH CASTLE, some great racing on some lovely old bikes] I will check with Kawasaki if the 89-92
odo drive unit will work for me, I'll let you know how I get on.
Thanks again for helping
Roadtrack
Thank you your kind welcome and your help with my Speedo question [sorry for this late reply I have been away at the excellent VETS TWIN SHOCK WEEKEND AT FARLEIGH CASTLE, some great racing on some lovely old bikes] I will check with Kawasaki if the 89-92
odo drive unit will work for me, I'll let you know how I get on.
Thanks again for helping
Roadtrack
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: speedo for 1988 KDX 200
You're welcome. WONDERFUL that you went to that race!
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128