KDXRIDER.NET

Hello KDXers
I'm a long time KDX owner (200 H,KLX forks,fmf exhaust,other goodies) who has access to a CNC mill.
Would there be any interest in some front and rear disc protectors or other machined goodies ?
I'm located in So Cal and am trying to see if there's a demand.
I'm going to be making front and rear guards for mine and a buddys bike soon.
Thanks Tom

Some cnc triples to make another fork a bolt on affair would be pretty sweet....

Maybe something from. A new KTM that would be awesome

Sent from my SAMSUNG-SM-N910A using Tapatalk

Another part might be countershaft sprocket case guards.

Sent you a PM with more info.

IceCold4x4 wrote:Some cnc triples to make another fork a bolt on affair would be pretty sweet....

Maybe something from. A new KTM that would be awesome

Oh, no WP forks! Maybe for the newer KYB's (aka SSS) but not any WP fork.

pumpguy wrote:Another part might be countershaft sprocket case guards.

Sent you a PM with more info.

Yeah, that's about the only part I can think of that I wouldn't mind having something better. Well, of course, unless you want to make a power valve adjuster/cover combo!

How about ohlins then?

Sent from my SAMSUNG-SM-N910A using Tapatalk

An e series clutch basket would be nice. Can't find anything else besides used stock baskets that are pretty worn already...

IceCold4x4 wrote:Some cnc triples to make another fork a bolt on affair would be pretty sweet....

Maybe something from. A new KTM that would be awesome

Sent from my SAMSUNG-SM-N910A using Tapatalk

You're killing me. You paid how much for that bike and you are asking about a set of one off triple clamps??

CosiestUnicorn wrote:An e series clutch basket would be nice. Can't find anything else besides used stock baskets that are pretty worn already...

Welcome to the forums.

http://www.ebay.com/itm/Pro-X-Racing-Cl ... 15&vxp=mtr

Jason wrote:

IceCold4x4 wrote:Some cnc triples to make another fork a bolt on affair would be pretty sweet....

Maybe something from. A new KTM that would be awesome

Sent from my SAMSUNG-SM-N910A using Tapatalk

You're killing me. You paid how much for that bike and you are asking about a set of one off triple clamps?? [emoji38]

Hey I never said I was intelligent lol. And the bike was bought cheap to get through the wife's not another bike rule... Hell I've spent 3x what I paid for my zrx on farkles and go fast goodies. And it wasn't a cheap bike to begin with.... Lol

Sent from my SAMSUNG-SM-N910A using Tapatalk

pumpguy wrote:Another part might be countershaft sprocket case guards.

Sent you a PM with more info.

That's what I was gonna say to..... I took my sprocket cover off cuz it kept getting packed full of mud and gunk, but would still like to have some sort of decent case saver and can't find one aftermarket. I've heard some of the KX ones fit but haven't experimented around with it yet. A machined one just for the KDX would be awesome!

I've always wanted to draw up a new case saver and have a few made... never got around to it. If you made a kewl one, I would buy it! Share some details on the guards that you plan to make, I may be interested in those depending on price.

Thanks for the input, Ill be in touch with some ideas .

CosiestUnicorn wrote:An e series clutch basket would be nice. Can't find anything else besides used stock baskets that are pretty worn already...

Really no need to design one. A YZ basket can work on an E series. It takes a little more work than fitting one to an H series. And then you can auto clutch it.

http://www.ebay.com/itm/Kawasaki-KDX200 ... 1c887805ce

http://www.ebay.com/itm/Kawasaki-KDX200 ... 46657ddb91

I haven't installed mine yet on my 93 KDX 250 so can't say how they will hold up, look very similar to the ProX one Jason listed, just less bits (no cush drive rubbers)

tmmyghst wrote:Hello KDXers
I'm a long time KDX owner (200 H,KLX forks,fmf exhaust,other goodies) who has access to a CNC mill.
Would there be any interest in some front and rear disc protectors or other machined goodies ?
I'm located in So Cal and am trying to see if there's a demand.
I'm going to be making front and rear guards for mine and a buddys bike soon.
Thanks Tom

I always looked at disc guards as a $90 part protecting a $65 part.... so I skipped them.

I would love a double cable perch though, so I could have a clutch and cable rest brake on one setup !

you could sell that for every cable clutch bike made !

I would love a double cable perch though, so I could have a clutch and cable rest brake on one setup !

you could sell that for every cable clutch bike made ![/quote]

That idea for a special clutch lever perch that could also hold a hand operated rear brake lever is a great idea IMO. The addition of switches for horn and headlight dip switch has taken up all the real estate on my bars. No room for another lever for rear brake.

ohgood wrote:I always looked at disc guards as a $90 part protecting a $65 part.... so I skipped them.

It is protecting more than the part. Hard to ride a bike with a bent rotor back to the truck, 20 miles away.