Hi,
I'm not having much luck finding what exhaust o-rings and springs to use and where to get them. I have a 1990 KDX 200 E with an FMF fatty pipe and powercore silencer. Any suggestions?
1990 KDX exhaust o-rings and springs for FMF fatty?
-
- Member
- Posts: 8
- Joined: 11:08 am Apr 20 2017
- Country: WA United States
-
- Member
- Posts: 41
- Joined: 09:08 pm May 15 2017
- Country: United States
Re: 1990 KDX exhaust o-rings and springs for FMF fatty?
The OEM springs and O-rings work fine. I looked on FMF's site and surprised to see that they apparently don't have them on there. You can probably call them to place at order at 310-631-4363.
-
- Member
- Posts: 8
- Joined: 11:08 am Apr 20 2017
- Country: WA United States
Re: 1990 KDX exhaust o-rings and springs for FMF fatty?
Good to know! Thanks Commander. I'll order the OEM springs and o-rings then. I was also surprised that I couldn't find any offering from FMF. Kind of weird since they make the pipe and it looks like they offer the spring & o-ring kits for many other bikes. But that's fine now that I know the OEM kit will work.
-
- Member
- Posts: 743
- Joined: 06:37 am Nov 22 2009
- Country:
- Location: united kingdom
1990 KDX exhaust o-rings and springs for FMF fatty?
I took my old O rings to a hardwear / plumbing centre & matched them up with what they had .... Worked a treat..... As for springs look on eBay or at any MX shop , they should be able to match them
-
- Member
- Posts: 524
- Joined: 08:30 pm Oct 10 2011
- Country:
- Location: Forney, TX
Re: 1990 KDX exhaust o-rings and springs for FMF fatty?
The springs and o-rings were the same on the 87-89 kx125. Part number 011311 from FMF
'81 KDX 175
'90 KDX 200
'07 Vulcan 2000 Classic LT (totaled 4/25/15)
'82 Honda GL500 (sold)
'96 ZXi 1100 JetSki
'98 STX 1100 JetSki
'90 KDX 200
'07 Vulcan 2000 Classic LT (totaled 4/25/15)
'82 Honda GL500 (sold)
'96 ZXi 1100 JetSki
'98 STX 1100 JetSki
- KDXGarage
- KDXRider.net
- Posts: 14047
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1990 KDX exhaust o-rings and springs for FMF fatty?
;-)things from the hardware store are usually not biton, but buna, which won't last long.
I think that the OEM diagram showed the measurement on the oring, something like 39 x 2 or so.
I think that the OEM diagram showed the measurement on the oring, something like 39 x 2 or so.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128