1994 E Series with stock USD's & newer top clamps?
-
- Supporting Member I
- Posts: 29
- Joined: 03:25 pm Jan 23 2017
- Country: United States
1994 E Series with stock USD's & newer top clamps?
I have a 94 with the blue USD's & wanted to use a later year top triple clamp to add some rise & push the bars forward by flipping the mounts but I'm not sure if they will work. I know the 95 & newer clamps work with the conventional forks but didn't know if the USD's were a larger diameter? If the 95 forward clamps won't work then what other options do I have? At this point I'm pretty sure I don't want to do a front end conversion since the bike is completely original, I'm just looking to push the bars forward & add some rise.
1994 KDX 200 all original, street plate
2009 KTM 250XCF-W, street plate
2009 KTM 250XCF-W, street plate
- KDXGarage
- KDXRider.net
- Posts: 14062
- Joined: 06:45 am Nov 01 2004
- Country: United States of America
- Location: AL, USA
- Contact:
Re: 1994 E Series with stock USD's & newer top clamps?
1990 KX250 or 1990 KX500 is what you need. 1991 and newer are too big.
Thank you for participating on kdxrider.net.
To post pictures from a device: viewtopic.php?f=88&t=24128
To post pictures from a device: viewtopic.php?f=88&t=24128
-
- Member
- Posts: 463
- Joined: 02:47 pm Aug 10 2012
- Country: USA
- Location: Sac, Ca
Re: 1994 E Series with stock USD's & newer top clamps?
There's also different bar risers available out there that can do what you want:Jason wrote:1990 KX250 or 1990 KX500 is what you need. 1991 and newer are too big.
-
- Supporting Member I
- Posts: 29
- Joined: 03:25 pm Jan 23 2017
- Country: United States
Re: 1994 E Series with stock USD's & newer top clamps?
That's interesting, I've never seen the bottom risers before. They look similar to Rox Risers, any idea who makes them?sarrant wrote:There's also different bar risers available out there that can do what you want:Jason wrote:1990 KX250 or 1990 KX500 is what you need. 1991 and newer are too big.
1994 KDX 200 all original, street plate
2009 KTM 250XCF-W, street plate
2009 KTM 250XCF-W, street plate
-
- Member
- Posts: 463
- Joined: 02:47 pm Aug 10 2012
- Country: USA
- Location: Sac, Ca
Re: 1994 E Series with stock USD's & newer top clamps?
fishwater wrote:That's interesting, I've never seen the bottom risers before. They look similar to Rox Risers, any idea who makes them?sarrant wrote:There's also different bar risers available out there that can do what you want:Jason wrote:1990 KX250 or 1990 KX500 is what you need. 1991 and newer are too big.
7/8 offset riser by Zeta.