hi all i got the above to replace it.
but i thought it would be in the slide assembly but cant see it.
is it located in the carb bowl area .?
ran out of time last night
Just seen the pic posted in my other thread.
presumably it is accessed by removing the bowl?
what size Torx fitting?
So i can mod one at work today ready to use tonight.
thanks mark
jet block gasket location ? kdx200 H
- two-stroke-brit
- Supporting Member I
- Posts: 132
- Joined: 05:40 pm Jul 30 2016
- Country: USA
- Location: HOUSTON TEXAS
jet block gasket location ? kdx200 H
She might not be pretty but always a fun ride !
- Tyl3r
- Platinum Member
- Posts: 1335
- Joined: 06:51 pm Nov 26 2012
- Country: USA
- Location: SW Pennsylvania
Re: jet block gasket location ? kdx200 H
Remove the carb bowl and locate the block that the two jets thread into. It is secured to the carb body with 2 security torx screws. IIRC, those are the only two security torx fittings inside of there lol so if you find those, you'll be all set.
Can't recall the size of the torx bit I used. Do a search on here, I remember someone posting the size at one time.
Can't recall the size of the torx bit I used. Do a search on here, I remember someone posting the size at one time.
04/05 KX220 Hybrid all decked out
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike
18 KTM 500 EXC-F Dual Sport/Sumo toy
24 KTM 300XC-W Cheater bike