top end rebuild - bore within spec but very smooth

Got questions? We got answers....
Post Reply
bws2
Gold Member
Gold Member
Posts: 165
Joined: 09:30 pm Mar 15 2015
Country:

top end rebuild - bore within spec but very smooth

Post by bws2 »

I'm working on a top end rebuild for my 2001 KDX200.

The bore diameter is within spec.

My concern is whether the rings will seat okay since the inside of the bore is so smooth.

A guy at a local machine shop suggested I not use my synthetic blend oil (Golden Spectro) during the break in.
He recommends a regular 2 stroke oil instead, He believes synthetic lubricates a little too well and that may keep
the rings from seating correctly.

What do you guys think?
User avatar
bufftester
Platinum Member
Platinum Member
Posts: 3455
Joined: 06:03 pm Oct 31 2012
Country: USA
Location: University Place, WA

Re: top end rebuild - bore within spec but very smooth

Post by bufftester »

If its in spec and the coating isn't damaged in any way (i.e.: scratched, gouged, flaking) you should be fine.
User avatar
KDXGarage
KDXRider.net
KDXRider.net
Posts: 14047
Joined: 06:45 am Nov 01 2004
Country: United States of America
Location: AL, USA
Contact:

Re: top end rebuild - bore within spec but very smooth

Post by KDXGarage »

Look around the internet. The"not using" synthetic during break in sounds old school
Thank you for participating on kdxrider.net. :bravo:
To post pictures from a device: viewtopic.php?f=88&t=24128
Post Reply