KDX side stands

Got questions? We got answers....
Post Reply
Josha
Member
Posts: 3
Joined: 04:57 am Dec 10 2016
Country: Australia

KDX side stands

Post by Josha »

Are the stands interchangeable between years? I have an 83 and was thinking of throwing on a later one as mine is missing. Later one should be easier to buy. I don't mind if it has to shortened, as long as it bolts to the swingarm ok.
pumpguy
Gold Member
Gold Member
Posts: 821
Joined: 10:00 am May 29 2012
Country:
Location: Spring Grove, Illinois

KDX side stands

Post by pumpguy »

From personal experience, I know that the E and H series stands are pretty much interchangeable. The bolt centers are the same for both where they bolt on to the swing arm. The foot is a little smaller on the E series when compared to the H series, and I think the tube diameter is a little smaller too. I've sold an E series stand for use on on an H series, and buyer said it works just fine.

Can't say anything about earlier models. I would suggest you check the part fiches to see how the numbers compare for the various years.
Post Reply