Page 1 of 1
Fuel/oil mixture
Posted: 10:37 pm Oct 15 2016
by Jasper
Hello
I have kdx200 e series
It has a sticker that says 32:1 mixture
Now my question is do i have to keep mixing at this measurements keeping in mind that it is 2016 and using the castrol power rs 2t (tts) oil
Is this oil more advanced (better lubrications) than the 2stroke oils in 91
Re: Fuel/oil mixture
Posted: 04:01 am Oct 16 2016
by KDXGarage
Where and how do you ride your KDX? Higher rpm requires more oil, in general.
Fuel/oil mixture
Posted: 07:17 am Oct 16 2016
by C George
OIls have come a long way in the last 20 years ,,,, oil debates we don't need to get into as it's mostly personal preference
Re: Fuel/oil mixture
Posted: 08:47 pm Oct 16 2016
by KDXohio
Klotz r50 at 40:1 is what I run
Re: Fuel/oil mixture
Posted: 09:59 pm Oct 16 2016
by doakley
I would mix the oil at the ratio recommended by the oil manufacturer.
Amsoil 50:1 do me.
Re: Fuel/oil mixture
Posted: 11:14 am Oct 18 2016
by Tyl3r
doakley wrote:I would mix the oil at the ratio recommended by the oil manufacturer.
Amsoil 50:1 do me.
X2 - I run the Amsoil Sabre at 80:1
Re: Fuel/oil mixture
Posted: 06:38 pm Oct 18 2016
by ohgood
You'll be fine with whichever oile , just make sure you aren't lean.
Re: Fuel/oil mixture
Posted: 04:02 pm Oct 21 2016
by bufftester
32:1 is the manufacturers recommendation because they don't want to be on the hook for engine seizures. Any modern oil at any ratio (32:1, 40:1, 50:1) will work fine. The two big things to keep in mind is that you pick an oil and ratio, and then jet to it. If you change anything then you'll need to rejet to get the best performance